Gilles MUE2 Rearset For Suzuki GSX-R 1000 - MUE2-S01

The Gilles MUE2 kit comes with the necessary linkage components to accommodate its specific geometry and shift patterns.

Yes, you can swap between standard and GP shift patterns as often as needed by reorienting the gear arm.

Yes, Gilles offers replacement parts for individual components of the rearset system.

If you are only adjusting the lever position, you usually do not need to bleed the system; however, if you remove the master cylinder from the old rearset, you must bleed the rear brake.

These are designed to work with most standard exhaust configurations, though some aftermarket high-mount exhausts may interfere with clearance.

It is recommended to inspect and lubricate the bearing points during every major oil change or after riding in wet conditions.

Check that the double ball bearing connections are tight and that the shift rod is properly adjusted to neutral tension.

Ensure the push-and-rotate mechanism is fully engaged and free of debris or grit.

Verify that the brake master cylinder pushrod has slight free-play when the brake lever is in the resting position.