Volden White Draft Excluder Kit - (L)2500mm (W)72mm
Best current price£20.00from B&Q
Best offers
Shopping.co.uk recommended and popular offers
B&Q£20.00Visit shop B&Q - White Draft Excluder Kit(L)2500mm (W)72mm
Visit shopB&Q£20.00Visit shop One Offer
1 offer from £20.00
View price history by clicking the chart icon.
Product Information
Full details
This Volden White Draft Excluder Kit is designed for homeowners looking to improve garage insulation and prevent unwanted elements from entering. Its key benefit is effectively blocking cold drafts and debris, leading to a more comfortable garage space and potentially lower heating costs. A caveat to consider is its specific application to the bottom of garage doors.
All features
| Brand | Volden |
|---|
Extended Product Information
FAQs
What is the primary purpose of this draft excluder?
Its main purpose is to block cold air, drafts, dust, leaves, and other debris from entering your garage through the gap at the bottom of the garage door.
How long is the draft excluder strip?
The kit comes with a strip that is 2500mm (2.5 meters) long.
What is the width of the excluder strip?
The width of the strip is 72mm.
Can I cut the draft excluder to fit my door?
Yes, the 2500mm length can be cut to size to perfectly match the width of your garage door.
Is this easy to install?
Yes, it is designed for easy DIY installation with basic tools.
What should I do if my garage floor is not perfectly level?
For uneven floors, ensure the excluder seals against the lowest points. You may need to trim it carefully to maintain contact across the door's width or consider a more flexible sealing solution if the unevenness is extreme.
How do I clean the draft excluder?
Clean it by wiping with a damp cloth. Avoid harsh chemicals.
Troubleshooting
Drafts still entering after installation
Ensure the excluder is firmly pressed against the floor. Check if the garage door bottom is uneven, and if so, consider trimming the excluder to accommodate the lowest point or shimming the door bottom.
Excluder not staying attached
Clean the door surface thoroughly before attaching. Ensure you are using the correct fixings or adhesive recommended for your door material. Consider using a stronger adhesive if necessary.
Difficulty cutting the strip
Use a sharp utility knife with a fresh blade, or a fine-tooth saw. Ensure the strip is securely held while cutting.
Pros and Cons
Pros
- Significantly reduces drafts and heat loss from the garage.
- Prevents entry of dust, leaves, insects, and other debris.
- Improves the overall comfort and usability of the garage space.
- Simple DIY installation process.
- Durable construction for long-lasting performance.
- Cost-effective solution for garage door insulation.
Cons
- Requires a relatively flat and even garage door bottom edge for optimal sealing.
- May need to be trimmed to size, requiring basic cutting tools.
- Primarily designed for garage doors, not suitable for other applications.
- The white color might show dirt more readily in some environments.
- If the garage floor is uneven, a perfect seal might be challenging.
Setup, Compatibility & Care
Setup:
- Measure the width of your garage door.
- Cut the draft excluder strip to the measured width using a sharp utility knife or saw.
- Clean the bottom edge of your garage door to ensure good adhesion.
- Position the excluder strip firmly against the bottom of the door, ensuring the brush or rubber seal makes contact with the floor.
- Secure the excluder strip using the provided fixings or appropriate adhesive (depending on kit contents).
Compatibility:
This excluder is designed for the bottom edge of most standard garage doors. Ensure your garage door has a suitable profile or channel to attach the strip. It works best on doors with a relatively flat bottom edge that meets a level floor.
Care:
Wipe the excluder strip with a damp cloth as needed to remove dirt or dust. Avoid using harsh chemicals that could damage the material. Periodically check that it remains securely attached to the door.