Red Paddle Co Sport SUP Pack - 11ft 3in - Blue


Currently unavailable


Currently unavailable
The 11'3" Sport inflatable SUP by Red Paddle Co is designed for paddlers looking to step up from an all-round board into touring and faster performance. It provides excellent stability at 32 inches wide while utilizing a sleek, drawn-out nose and speed tail for efficient gliding. Please note that while it handles a 110kg rider capacity well, users should be prepared for the added effort required to maintain higher speeds compared to a recreational-focused board.
| Material | Nylon |
|---|---|
| Model Part Number | 5056291111388 |
| Brand | Red Paddle Co |
The 11'3" Sport SUP has a maximum rider weight capacity of 110kg (243lbs).
No, the touring fin uses a hand-tightened finger bolt, making it easy to attach and remove on the beach without any tools.
The combination of high-density MSL drop-stitch material and the patented RSS (Rocker Stiffening System) batons provides superior structural integrity.
While the board is designed for speed and touring on flat water, it can handle light chop. It is not recommended for dedicated surf zones or waves.
The package includes the board, Titan II pump, ATB Transformer backpack, 8ft coiled leash, a 9-inch touring fin, and your choice of paddle.
Ensure the RSS batons are fully inserted into their slots and check that the inflation pressure matches the recommended PSI.
Verify the touring fin is fully seated in the fin box and the finger bolt is tightened. Ensure you are looking at the horizon rather than your feet while paddling.
Check that the mode switch on the Titan II pump is set correctly; start on the high-volume setting and switch to high-pressure as the board gets firm.
Setup is streamlined using the Titan II pump. Simply inflate to your preferred pressure, then insert the RSS batons into the side pockets to achieve maximum rigidity. The 9-inch touring fin installs by sliding into the universal fin box and tightening with the provided finger bolt—no tools required.
For care, always rinse the board with fresh water after salt-water use. Allow the board to dry completely before rolling it up for long-term storage to prevent mold. When packing the board, ensure the valve is open to let air escape freely. Store the board in a cool, dry place out of direct sunlight to protect the high-density material from UV degradation.