Best current price£264.99from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£264.99Visit shop Low Entry Trolley Jack - 2500Kg Weight Limit - Twin Piston - 495Mm Max Height 5056524235348
Visit shop
B&Q£284.99Visit shop - Heavy-Duty Low Entry Trolley Jack With 2500Kg Capacity And Twin Piston Lift
Visit shop3 offers from £264.99 - £284.99
View price history by clicking the chart icon.
This Heavy-Duty Low Entry Trolley Jack is designed for automotive enthusiasts and professional mechanics who need to lift vehicles with low ground clearance. Its key benefit is the ability to lift up to 2500kg with a very low entry height, minimizing the risk of damage to sports cars and custom vehicles. A potential caveat is its weight (30.3kg), requiring careful handling during setup and storage.
| Brand | Loops |
|---|
The trolley jack has a maximum lifting capacity of 2500kg (2.5 tonnes).
The minimum saddle height is 88mm, making it suitable for vehicles with very low ground clearance.
The maximum saddle height this jack can achieve is 495mm.
No, for safety and stability, this trolley jack must always be used on a firm, level, and stable surface.
The jack is compatible with replacement parts such as the Rubber Jack Pad (JP17) and the Polyurethane Wheel Kit (2500LE.PW).
Periodically check the hydraulic fluid level and top up with the recommended hydraulic jack oil. Keep the lifting ram clean and inspect seals for wear.
The 'Rocket Lift' is a twin-piston mechanism that allows the saddle to reach its maximum height with fewer pump strokes, significantly speeding up the lifting process.
Check the hydraulic fluid level and top up if low. Ensure the release valve is fully closed. Inspect for any leaks in the hydraulic system.
Ensure the release valve is not partially open. Check seals for damage or wear. If the issue persists, the hydraulic system may require servicing.
Verify the jack is on a level surface and the vehicle is correctly positioned. Check hydraulic fluid level. If the issue persists, internal components may need attention.
Discontinue use immediately. Contact the manufacturer or a qualified repair service for inspection and repair. Do not attempt to use a damaged jack.
Setup: Ensure the trolley jack is placed on a firm, level, and stable surface before use. Position the jack saddle directly under the vehicle's designated jacking point. Operate the handle by pumping it up and down to raise the saddle. To lower the vehicle, slowly turn the release valve counter-clockwise.
Compatibility: This trolley jack is compatible with replacement parts such as the Rubber Jack Pad (JP17) and Polyurethane Wheel Kit (2500LE.PW). Always ensure any accessory used is designed for this type of jack and rated for its capacity.
Care: After each use, clean the jack with a dry cloth to remove dirt and debris. Periodically check the hydraulic fluid level and top up if necessary with the recommended hydraulic jack oil (refer to manufacturer recommendations for specific fluid type). Inspect the lifting ram, seals, and chassis for any signs of wear or damage before each use. Store the jack in a dry place, away from corrosive elements.
