Best current price£33.99from B&Q
Shopping.co.uk recommended and popular offers
B&Q£33.99Visit shop - Flag Roofix GreyLiquid Roof RepairInstant Waterproof For LeaksGuttersLead FlashingMetalSlateConcreteFelt 1L
Visit shop1 offer from £33.99
View price history by clicking the chart icon.
Flag Roofix Waterproof Coating Paint in Grey is designed for homeowners and DIY enthusiasts needing an instant solution for leaking roofs and gutters. Its key benefit is its all-weather application, allowing use even in damp conditions for immediate repairs. A potential caveat is that it's a single-pack compound, which might have limitations compared to two-part systems for very extensive damage. This versatile, elastomeric acrylic-based coating provides a durable, flexible, and waterproof layer with excellent adhesion to various roofing materials, offering long-term protection.
| Colour | Grey |
|---|---|
| Model Part Number | 20/10 |
| Brand | Flag |
Yes, Flag Roofix can be applied to asphalts and bitumastic roofing materials.
No, Flag Roofix does not require any special primers for application.
Drying time varies depending on temperature and humidity. It can be rain-resistant within a few hours, but full curing may take longer. Avoid heavy foot traffic or rain for at least 24 hours.
When applied correctly, Flag Roofix can provide long-term protection exceeding 10 years.
Yes, it can be applied in hot weather. Ensure good ventilation and wear appropriate protective gear. Avoid direct prolonged skin contact.
Typically, a stiff brush, roller, or trowel can be used for application. Tools should be cleaned with water immediately after use.
While primarily designed for roofs and gutters, it can be used on vertical surfaces where waterproofing is needed, provided there is adequate adhesion and support during curing.
Ensure the roof surface is clean and free from dust, oil, or loose material. Reapply after thoroughly cleaning the area.
While it can be applied in damp conditions, very cold temperatures can affect viscosity. Store the product in a warmer environment before application. Avoid applying if frost is expected.
Check if the product was applied to a dry, clean surface and if sufficient material was used to cover the damaged area. Ensure the product has fully cured. For persistent leaks, consider if the damage is beyond the scope of a surface coating.
This can happen in colder temperatures. Warm the container slightly and stir thoroughly. Ensure the surface is not excessively wet, as this can dilute the product during application.
Setup: Ensure the application area is clean and free from loose debris, moss, or vegetation. Minor repairs can be applied directly to the affected area. For larger areas, ensure adequate ventilation. Tools should be cleaned immediately after use with water.
Compatibility: Flag Roofix is compatible with felt, asphalts, slate, clay, concrete, corrugated sheets, and asbestos roofing materials. It does not require a primer.
Care: Store in a cool, dry place away from direct sunlight and extreme temperatures. Keep the container tightly sealed when not in use. For maintenance, periodically inspect the roof for any new damage and reapply if necessary.
