Best current price£24.04from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£24.04Visit shop Qwork Heavy Duty Pipe Cutter, 1/8-Inch To 2-Inch Steel Pipe Cutter For Cutting Pipes Of Aluminum, Copper, Stainless Steel 726679931970
Visit shop2 offers from £24.04 - £40.72
View price history by clicking the chart icon.
This QWORK Heavy Duty Pipe Cutter (Model: DG2804) is designed for plumbers, electricians, and DIY enthusiasts needing fast, clean cuts on various pipe materials up to 2 inches in diameter. Its key benefit is the combination of durable construction with user-friendly adjustments, ensuring efficient pipe preparation. A potential caveat is its limitation to specific pipe sizes, with larger diameters requiring a different model. The cutter excels with aluminum, copper, and stainless steel pipes and offers conversion to a 3-wheel configuration.
| Model Part Number | DG2804 |
|---|---|
| Brand | QWORK |
The QWORK DG2804 is designed for cutting pipes made of aluminum, copper, and stainless steel.
It can cut pipes ranging from 1/8-inch (3 mm) up to 2-inch (50 mm) in diameter.
While primarily designed for metal, with the correct 3-wheel conversion and appropriate wheel, it might be adaptable for certain plastic pipes, but this is not its intended use.
You need to purchase a compatible 3-wheel cutter set and replace the existing rollers with the new wheels according to the tool's design.
The extra-long shank is designed to protect the adjustment threads from damage during use and storage, thereby increasing the tool's lifespan.
Typically, a replacement cutting wheel is not included. It is recommended to have a spare on hand for extended use.
It is advisable to lubricate the adjustment screw periodically, especially after heavy use or if you notice any stiffness, to ensure smooth operation.
Clean the adjustment threads and apply a light lubricant. Ensure the pipe is securely gripped but not overtightened.
Check if the cutting wheel is sharp and free of burrs. Ensure consistent pressure is applied during the cutting process and that the pipe is rotating smoothly.
The material being cut may be too hard for the wheel, or excessive force was applied. Ensure you are using the correct type of wheel for the material and apply steady, controlled pressure.
Ensure the pipe is clean and dry. Tighten the adjustment knob sufficiently to create a firm grip on the pipe.
Setup: The pipe cutter is ready for immediate use upon unboxing. Ensure the cutting wheel is properly seated and aligned. For conversion to a 3-wheel cutter, unscrew the existing rollers and attach the appropriate cutter wheel (sold separately) in their place.
Compatibility: This model is primarily designed for cutting pipes made from aluminum, copper, and stainless steel within its specified size range (1/8" to 2"). Ensure the material hardness is within the tool's capabilities.
Care: After each use, clean the cutting wheel and rollers of any debris. Apply a light coat of lubricant to the threads of the adjustment screw to prevent seizing and ensure smooth operation. Store the cutter in a dry environment to prevent rust.
