Best current price£44.00from Homebase
Shopping.co.uk recommended and popular offers
Homebase£44.00Visit shop Dulux Trade Walls And Ceilings Raw Cashmere Vinyl Matt Paint 2.5L
Visit shop3 offers from £44.00
View price history by clicking the chart icon.
This Dulux Trade Vinyl Matt Paint in Raw Cashmere is designed for DIY enthusiasts and professional decorators seeking a high-quality finish for interior walls and ceilings. Its key benefit is providing excellent coverage, often in fewer coats, which saves time and effort. A key caveat is that this paint is mixed to order and therefore cannot be returned or refunded. The paint offers a smooth, flat matt finish that helps to disguise imperfections, is easy to apply with minimal mess, and dries quickly.
| Colour | Beige |
|---|---|
| Model Part Number | DXVM1602500 |
| Brand | Dulux Trade |
This paint is designed for interior walls and ceilings.
While it can be used on bathroom walls and ceilings, it is not recommended for areas with high humidity or direct water contact, such as shower enclosures. A vinyl silk or moisture-resistant paint would be more appropriate for such areas.
Coverage can vary depending on the surface and the existing color. However, this paint offers excellent coverage and often requires fewer coats, typically one or two, to achieve a uniform finish.
The paint provides a flat matt finish, which is non-reflective and helps to disguise imperfections on the wall surface.
No, this product is mixed to order and therefore cannot be returned or refunded. Please ensure you have selected the correct color and quantity before purchasing.
Clean brushes and rollers with water immediately after you have finished painting.
The paint dries quickly, allowing for recoating typically within a few hours, depending on the ambient temperature and humidity.
Stir the paint thoroughly. If still too thick, add a small amount of clean water (up to 1 part water to 10 parts paint) and mix well.
Ensure the paint is applied evenly and in consistent strokes. Avoid overworking the paint. Ensure the surface was properly prepared and that you are applying the paint at the correct temperature.
Apply an additional coat. Ensure the surface was properly primed if it was heavily stained or a drastic color change. Make sure you are using enough paint per coat.
Check that you are painting within the recommended temperature and humidity range (ideally 10-30°C and moderate humidity). Ensure adequate ventilation in the room.
Preparation:
Ensure the surface to be painted is clean, dry, and free from dust, grease, and flaking paint. Fill any cracks or holes with a suitable filler and allow to dry. Lightly sand any glossy surfaces to improve adhesion.
Application:
Stir the paint thoroughly before use. Apply using a brush or roller. For best results, apply in thin, even coats. Avoid painting in excessively cold, hot, or humid conditions. Recommended application temperature is between 10°C and 30°C.
Compatibility:
This paint is suitable for interior walls and ceilings. It can be applied over most existing paint finishes, provided they are sound. Not suitable for exterior use or for surfaces that will be in direct contact with water (e.g., shower areas).
Care:
Clean brushes and rollers with water immediately after use. For cleaning the painted surface, use a soft cloth dampened with mild detergent. Avoid abrasive cleaners, as they can damage the matt finish.
