Bandai SD Gundam Ex-Standard RX-78-2 Gunpla Kit - Gunpla - 65615

You will need nippers, a hobby knife, and possibly sandpaper for cleaning up the parts. Paint and markers are optional for customization.

Glue is not required, as the parts snap together. However, some modelers use glue for added security.

Yes, the kit is designed to be painted. Use appropriate model paints and primers for best results.

This is an SD (Super Deformed) kit, which means it has a stylized, chibi-like appearance. The scale isn't precisely defined but is generally smaller than 1/144 scale kits.

Contact Bandai or a hobby shop that specializes in Gunpla for replacement parts, if available. Alternatively, you may need to purchase another kit.

Use nippers or a hobby knife to carefully cut the parts from the plastic runners. Cut as close to the part as possible to minimize the need for cleanup.

Panel lining is the process of adding detail to the model by using a thin marker or paint to accentuate the panel lines, adding depth and realism.

Double-check the instructions and ensure the correct parts are being used. Trim any excess plastic from the connection points.

Work in a well-lit area and use a container to store the parts as you remove them from the runners.

Use sandpaper or a hobby knife to carefully remove the seam lines before painting or detailing.