Sealey Abrasive Strip Disc - 115 x 13mm - Black - 22mm Bore

This disc is primarily used for removing paint, rust, and flaking materials, and for general surface preparation and cleaning with a less harsh abrasive action than a grinding disc.

You need a 115mm (4.5 inch) angle grinder with a 22mm bore to fit this disc.

No, this disc is designed for lighter abrasive tasks like paint and rust removal and surface conditioning. It is not intended for heavy-duty grinding or cutting.

Each pack contains 10 abrasive strip discs.

Always wear appropriate personal protective equipment (PPE), including safety glasses or a face shield, gloves, and hearing protection. Ensure the work area is well-ventilated and free of flammable materials. Always follow the safety guidelines for your angle grinder.

While it might remove material from wood or plastic, this disc is specifically designed and optimized for use on metal surfaces.

Ensure the disc is correctly seated on the spindle and the mounting flange and nut are securely tightened. Check for any damage to the grinder's spindle or flanges.

This can indicate an unevenly worn disc or an improperly mounted disc. Stop the grinder and re-check the mounting. Ensure the angle grinder itself is in good working order.

You may be applying too much pressure, or the material you are working on is too hard for this type of abrasive. Lighten your pressure and ensure the disc is appropriate for the task. Consider a coarser grit or different abrasive type if needed.