kenable Network Cable - Cat5e - Straight to Right Angle Plug UP

This Cat5e cable supports speeds up to 1000 Mbps (Gigabit Ethernet).

U/UTP stands for Unshielded Twisted Pair. It means the cable does not have an overall foil or braid shield, relying on the twisting of the wire pairs for noise reduction.

Yes, Cat5e cables are backward compatible and can be used with Cat6, Cat6a, and Cat7 networking equipment, though speeds will be limited to Cat5e capabilities.

The right-angled connector bends the cable 90 degrees. If the port is in a tight space and requires the cable to exit upwards or downwards from the port, it should work. Check the orientation of your port and the cable's angle.

While the cable can transmit data for PoE devices, its U/UTP (unshielded) construction may not be ideal for sustained high-power PoE applications compared to shielded cables.

The cable uses 26 AWG copper wire.

This product comes as a single 1-meter cable (1 pc(s)).

Ensure both ends of the cable are securely seated in their respective ports. Verify that the network device and the port on the router/switch are functioning correctly. Try using a different network cable to rule out cable failure.

Check for physical damage to the cable, such as cuts or crushed sections. Ensure the cable is not exceeding its maximum recommended length for stable Gigabit speeds. Confirm that other network devices and your internet service are performing as expected.

The right-angled connector has a fixed orientation. Ensure the cable is oriented correctly for the port. If the angle is preventing connection, consider a straight cable or a cable with a different angle orientation.