Best current price£14.99from eBay
Shopping.co.uk recommended and popular offers
eBay£14.99Visit shop 10 x Polyfit 15mm spigot blank ends. Stop end caps. Blanking peg plug FIT915
Visit shop2 offers from £14.99
View price history by clicking the chart icon.
The Polypipe Poltfit Spigot End 15mm (FIT915) is designed for plumbing trade professionals working on new bathrooms, heating systems, or radiator installations. Its key benefit is providing a secure and reliable connection within push-fit plumbing systems. A potential consideration is that it requires compatible Polypipe Poltfit system components for proper function. This fitting is a 15mm spigot end designed for use with push-fit plumbing applications and includes a reinforcing sleeve for added durability.
| Model Part Number | FIT915 |
|---|---|
| Brand | Polypipe |
The main advantage is its push-fit connection, which allows for rapid and simple installation without the need for special tools or heat.
This fitting is designed for Polypipe Poltfit systems and is compatible with standard 15mm copper, PEX, PB, and multicore pipes, provided they meet the relevant BS EN standards and are prepared correctly.
The reinforcing sleeve is integrated into the fitting to provide extra support to the pipe, preventing it from kinking or becoming deformed at the connection point, especially under stress.
While durable, these fittings are primarily intended for above-ground domestic plumbing installations. Consult Polypipe for specific applications like underground services.
A permanent and secure connection is achieved by ensuring the pipe is clean, cut square, and fully inserted into the fitting until it reaches the internal stop. A slight twist can help confirm the seal.
No special tools are required for initial installation. A pipe cutter and possibly a deburring tool are recommended for preparing the pipe end. A pipe release tool is needed for removal.
Check that the pipe is cut square and free from burrs. Ensure the pipe end is not deformed or damaged. Clean the pipe end if necessary.
Remove the fitting, inspect the pipe end for damage or debris, and re-insert the pipe ensuring it is fully seated. Check the condition of the O-ring inside the fitting.
The pipe may not have been fully inserted. Remove the fitting and re-insert the pipe until it stops. Ensure the pipe is not kinked or distorted.
Use the Polypipe pipe release tool to disengage the grab ring. Ensure the tool is correctly placed around the pipe against the fitting body before attempting to pull.
Setup:
Compatibility:
Care:
