Best current price£9.90from Joybuy UK
Shopping.co.uk recommended and popular offers
Joybuy UK£9.90Visit shop Anycubic Standard Resin 405Nm Uv Rapid Curing For Lcd/Dlp/Sla 3D Printers(Grey, 1Kg) 6974662350350
Visit shop1 offer from £9.90
View price history by clicking the chart icon.
Designed for 3D printing hobbyists and professionals using LCD, DLP, or SLA systems, the ANYCUBIC Standard Resin provides high-precision results for intricate figurines and functional prototypes. This resin excels in delivering a smooth, matte finish that is easy to paint and finish; however, users should be aware that it requires proper safety gear and ventilation due to the chemical nature of photopolymer materials.
| Brand | ANYCUBIC |
|---|
Yes, as long as the printer is a 405nm LCD, DLP, or SLA machine, this resin is generally compatible.
Never pour liquid resin down the drain. Cure the waste resin under sunlight or a UV lamp until solid, then dispose of it as regular household waste according to local laws.
Store in a cool, dry place between 15°C and 35°C, away from direct sunlight.
Mixing resins is possible but can alter the curing properties; it is generally recommended to stick to the same brand and type for consistent results.
Typically, 3-5 minutes in a wash station or IPA bath is sufficient to remove uncured resin from the surface.
Cloudiness usually indicates the resin is cold, expired, or has not been properly shaken before use.
Increase the base layer exposure time or check that the build plate is properly leveled.
Extend the secondary UV curing time and ensure the model was thoroughly washed in IPA to remove uncured resin residue.
Ensure the model is properly supported in your slicing software and check that the resin was at room temperature before printing.
To begin, shake the bottle thoroughly for at least two minutes before pouring into the vat to ensure consistent pigment distribution. Always wear nitrile gloves and eye protection when handling liquid resin. Ensure your workspace is clean, as cured resin can be difficult to remove from surfaces. Store the resin in its original, opaque bottle away from direct sunlight and at room temperature (15-35 degrees Celsius). When cleaning, use high-concentration Isopropyl Alcohol (IPA) to rinse models, and ensure the part is completely dry before final UV curing.
