Best current price£36.99from B&Q
Shopping.co.uk recommended and popular offers
B&Q£36.99Visit shop - Neoflex Self Adhesive Flexible Neodymium Dots For ArtsCraftsModel MakingDiy And Hobbies30mm Dia27 Per A5 Sheet
Visit shop1 offer from £36.99
View price history by clicking the chart icon.
This guide is for crafters, DIY enthusiasts, and educators looking for a strong yet flexible magnetic solution. The key benefit is the unparalleled holding power derived from neodymium, combined with an easy-to-apply adhesive backing for creating custom displays and organizers. A caveat to consider is the required curing time for the adhesive to ensure a secure bond. These 30mm diameter dots offer a high-performance magnetic solution, integrating the strength of neodymium with the pliability of rubber, featuring a 3M adhesive peel-away back.
| Brand | B&Q |
|---|
NeoFlex dots are approximately 10 times stronger than typical commercially available magnetic sheets due to their neodymium composition.
It means they can hold significantly heavier items or provide a much more secure grip on lighter items compared to standard flexible magnets, making them suitable for more demanding applications.
For the most secure and lasting bond, it is recommended to allow between 24 to 32 hours for the 3M adhesive to fully cure after application.
Yes, the flexible nature of the NeoFlex material allows them to conform to and adhere securely to slightly curved surfaces.
The dots themselves are non-toxic. However, like all small magnets, they can present a choking hazard for young children. Adult supervision is always recommended when children are using these products.
Gently wipe the magnetic surface with a dry or slightly damp soft cloth. Avoid using harsh chemicals or abrasive materials that could damage the magnet or its coating.
Each dot measures 30mm in diameter and is 0.75mm thick.
Ensure the surface is clean and dry. Allow the adhesive to cure for the recommended 24-32 hours without disturbing it. Avoid applying to excessively dusty, oily, or textured surfaces.
Verify that the target surface is ferrous (iron-based). Check if the item being held is too heavy for the magnet's strength. Ensure the magnetic face is clean and free of debris.
The surface may not have been properly prepared. Clean and dry the surface thoroughly and reapply, ensuring firm pressure. Confirm the curing time has been respected.
Setup:
Compatibility:
These dots are compatible with any clean, smooth ferrous surface, including steel, iron, and magnetic primer-coated walls. They are also suitable for application on non-magnetic surfaces where you wish to add magnetic capabilities to an item (e.g., attaching a lightweight photo frame to a refrigerator).
Care:
