Humbrol Enamel Paint - Natural Wood - Matt - 14ml

Matt and Satin finishes are touch dry in 20-40 minutes and hard dry in up to 24 hours. Gloss finishes are touch dry in 1-2 hours. Metallics take approx. 10 days to dry completely. Drying times can vary based on ambient temperature and humidity. Always allow a minimum of 6 hours between coats, preferably overnight.

Yes, it is specifically designed for use on plastic model kits.

Use Humbrol Enamel Thinners for thinning and cleaning.

Clean brushes immediately after use with Humbrol Enamel Thinners.

This paint is suitable for various surfaces, including plastic, wood, glass, ceramics, metal, cardboard, and sealed plaster and hardboard. Always test on a small area first.

A 14ml tin covers approximately 0.3m², depending on the thickness of the application.

Yes, you can airbrush Humbrol Enamel Paint. Thin it with Humbrol Enamel Thinners, typically using a ratio of 2 parts paint to 1 part thinner.

Ensure proper ventilation and temperature. Allow more drying time, as humidity and low temperatures can affect drying times. Ensure paint is not applied too thick.

Thin the paint with Humbrol Enamel Thinners, using the recommended ratio of 2 parts paint to 1 part thinner for airbrushing or adjust for brush application as needed.

Apply the paint in thin, even coats. Use a high-quality brush and avoid overbrushing. Allow for adequate drying time between coats.

Ensure the paint is properly thinned. Clean the airbrush thoroughly with Humbrol Enamel Thinners after each use. Check for any dried paint residue within the airbrush.