Bullnose Fascia Double Ended Joiner - White - ENSIGN ULTRA

Name: Bullnose Fascia Double Ended Joiner - White - ENSIGN ULTRA
Brand: Freefoam
SKU: trhdvwltke
Availability: InStock

The Bullnose Fascia Double Ended Joiner by Freefoam is a durable and practical solution for your f...

Best current price£4.60from Professional Building Supplies

Best offers

Shopping.co.uk recommended and popular offers

Lowest priceMost popular

Professional Building Supplies£4.60Visit shop

Freefoam White Bullnose Fascia Internal Corner - 300Mm X 53Mm

Visit shop

All Offers

6 offers from £4.60 - £4,927.91

View price history by clicking the chart icon.

Professional Building SuppliesFreefoam White Bullnose Fascia Internal Corner - 300Mm X 53Mm

Free delivery in 1–3 days

£4.60

Visit shop

PVC Cladding UKFreefoam White Bullnose Fascia Internal Corner - 300Mm X 53Mm

Free delivery in 1–3 days

£4.60

Visit shop

Product Information

Full details

The Freefoam Bullnose Fascia Double Ended Joiner is an essential component for professional roofers and DIY enthusiasts working with the ENSIGN ULTRA range. Designed to provide a seamless, durable connection for fascia boards, this 600mm double-ended unit offers an efficient way to manage jointing without excess waste, though it requires precise rafter alignment during installation to ensure structural integrity.

All features

Colour	White
Series	ENSIGN ULTRA
Model Part Number	FMRJJ
Brand	Freefoam

Extended Product Information

FAQs

Can I use this joiner with other brands of fascia?

This joiner is specifically designed for the Freefoam ENSIGN ULTRA series. Compatibility with other brands is not guaranteed.

Does it need a backing board?

No, the ENSIGN ULTRA double-ended joiner is designed to be fixed directly to the rafter ends.

What nails should I use for fixing?

You should use two 65mm polytop nails at each rafter point.

How do I cut the 600mm piece to get two joints?

Simply cut the 600mm joiner in half to create two 300mm sections, which are sufficient for standard fascia joints.

What is the primary material color?

The product is finished in a standard White color.

Troubleshooting

Joint feels loose or unstable

Verify that two 65mm polytop nails are being used and that they are driven flush into the rafter.

Fascia board won't slide into the joiner

Check for debris inside the joiner channel and ensure the fascia board edge is cut perfectly straight without burs.

Joiner does not align with rafters

Ensure the rafter spacing is exactly 600mm or less; if rafters are wider, additional structural support may be required.

Pros and Cons

Pros

High efficiency due to the double-ended design
No backing board required for installation
Built-in soffit rebate for streamlined assembly
Matches the ENSIGN ULTRA product series perfectly
Durable, long-lasting construction

Cons

Requires precise measurement for the 600mm cut
Limited to White color variants
Requires specific 65mm polytop nails for proper fixing
Strict 600mm rafter spacing requirement

Setup, Compatibility & Care

To ensure a successful installation, verify that your rafters are spaced at a maximum of 600mm intervals. The product must be fixed directly to the rafter ends using two 65mm polytop nails per rafter point. Ensure the fascia boards are cut squarely to sit flush against the joiner. Regarding care, the product is low-maintenance; however, periodic cleaning with mild soapy water and a soft cloth is recommended to remove dirt and maintain the bright White finish. Avoid using abrasive sponges or harsh chemical solvents that could degrade the surface finish.