Shopping.co.uk

Faithfull Chuck Keyless - 10mm Capacity - 3/8 X 24 UNF

Faithfull Chuck Keyless - 10mm Capacity - 3/8 X 24 UNF

Keyless chuck for use on mains powered, cordless drills and drill drivers. Quick and easy to use t...

Best current price£13.74from OnBuy.com

Best offers

Shopping.co.uk recommended and popular offers

All Offers

3 offers from £13.74 - £14.55

View price history by clicking the chart icon.

OnBuy.comFaithfull Chuck Keyless 10Mm Capacity 3/8 X 24 Unf 5063750558578
Free delivery in 1–3 days
£13.74
Visit shop
B&QB&Q - Chuck Keyless 10mm Capacity 3/8 X 24 Unf Multi Colour (One Size)
Free delivery in 1–3 days
£14.55
Visit shop

Product Information

Full details

This guide is for DIY enthusiasts and professionals using mains-powered or cordless drills and drill drivers. The Faithfull Keyless Chuck offers a significant benefit by allowing for rapid, tool-free bit changes, increasing workflow efficiency. A potential caveat is its specific thread size, requiring compatibility checks. This chuck is designed for quick and easy operation, enabling hand-tightening for secure bit insertion and removal.

All features

Model Part Number5063750558578
BrandFaithfull

Extended Product Information

FAQs

What is the main advantage of a keyless chuck?

The primary advantage is the ability to change drill bits quickly and easily by hand, without needing a separate chuck key. This saves time and improves workflow efficiency.

What is the maximum drill bit size this chuck can hold?

This chuck has a maximum capacity of 10mm.

What is the minimum drill bit size?

The minimum capacity for this chuck is 0.8mm.

What type of thread does this chuck have?

It features a standard 3/8in x 24 UNF thread.

Can I use this chuck with any drill?

It is compatible with most mains-powered and cordless drills that have a 3/8in x 24 UNF threaded spindle. Always check your drill's specifications.

How do I ensure the drill bit is securely held?

Insert the bit fully and grip the chuck body firmly, rotating it clockwise by hand until it is tight. You should feel a secure lock.

How should I maintain the chuck?

Keep it clean and free of dust. Periodically clean the jaws and mechanism. Wipe with a dry or slightly damp cloth.

Troubleshooting

Chuck will not tighten onto the bit

Ensure the bit is fully inserted into the jaws. Check that the jaws are clean and not obstructed. Try opening the chuck jaws wider before inserting the bit.

Bit feels loose or slips during use

Ensure the chuck is tightened firmly by hand. If the issue persists, the chuck jaws may be worn or damaged, and the chuck may need replacement.

Chuck is difficult to open or close

Clean the chuck jaws and mechanism of any dust or debris. Ensure the drill spindle thread is clean. If stiff, a small amount of appropriate lubricant may help, but avoid excessive application.

Chuck does not fit the drill spindle

Verify that your drill has a 3/8in x 24 UNF threaded spindle. This chuck is not compatible with other thread sizes or SDS-type chucks.

Pros and Cons

Pros

  • Enables quick, tool-free bit changes for increased efficiency.
  • Easy to operate by hand for secure bit locking.
  • Compatible with a wide range of drill bits (0.8-10mm).
  • Standard 3/8" x 24 UNF thread ensures broad drill compatibility.
  • Suitable for both corded and cordless drill types.

Cons

  • May not fit older drill models with non-standard thread sizes.
  • Requires a compatible drill with a 3/8" x 24 UNF thread.
  • For optimal performance, regular cleaning might be necessary.
  • Hand-tightening may not be sufficient for extremely high-torque applications without supplementary tightening (though not recommended).

Setup, Compatibility & Care

Setup:

  1. Ensure your drill is unplugged or the battery is removed for safety.
  2. Unscrew the old chuck (if applicable) or attach the new chuck to the drill spindle.
  3. The chuck has a 3/8in x 24 UNF thread. Screw it onto the corresponding thread on your drill's spindle.
  4. Tighten it firmly by hand.
  5. Insert the desired drill bit.
  6. Grip the chuck body and rotate it clockwise to tighten securely onto the bit. Ensure the bit is centered and held firmly.

Compatibility:

  • This chuck is compatible with most mains-powered and cordless drills and drill drivers that feature a 3/8in x 24 UNF threaded spindle.
  • It is suitable for rotary drills and drill drivers.
  • Verify your drill's spindle thread size before purchasing if unsure.

Care:

  • Keep the chuck clean and free from dust and debris, especially after use in dusty environments.
  • Periodically, open the chuck fully and use a small brush to remove any accumulated dirt.
  • A light application of lubricant may be applied to the internal mechanism if it becomes stiff, but avoid over-lubrication.
  • Wipe the exterior with a dry or slightly damp cloth.

Price History

DatePrice
Visit shop