Shopping.co.uk

BERU Engine Spark Plug - Z243

BERU Engine Spark Plug - Z243

This BERU ULTRA Spark Plug, part number Z243, is manufactured to OE-quality standards for reliable...

Best current price£6.57from eBay

Best offers

Shopping.co.uk recommended and popular offers

Lowest priceMost popular
eBay£6.57Visit shop

BERU by DRiV Z243 Spark Plug for CHANA,CHANGAN,CITROËN,DACIA,LADA,LANDWIND (JMC)

Visit shop

All Offers

11 offers from £6.57 - £32.39

View price history by clicking the chart icon.

eBayBERU by DRiV Z243 Spark Plug for CHANA,CHANGAN,CITROËN,DACIA,LADA,LANDWIND (JMC)
£5.90 delivery
£6.57
Visit shop
AutodocBERU Spark plug RENAULT,PEUGEOT,CITROËN Z243 0002230300,12VR8SE,596084 Engine spark plug,Spark plugs 8200662185,596083,224018760R,8200030765
£8.45 delivery
£11.23
Visit shop

Product Information

Full details

The BERU Z243 Spark Plug is designed for vehicle owners seeking reliable, OE-quality replacement parts for select Smart and Dacia models. Its key benefit is ensuring consistent engine performance through precise ignition. A potential caveat is the importance of verifying exact fitment and dimensions against your vehicle's specifications, as variations can exist. This pack includes 10 spark plugs, featuring a gasket seat, M12x1.25 thread size, and a 0.9mm electrode gap.

All features

Model Part NumberZ243
BrandBERU

Extended Product Information

FAQs

What vehicles is the BERU Z243 spark plug compatible with?

This spark plug is listed as compatible with certain Smart FORTWO Convertible/Coupe (453) and Dacia SANDERO II, DOKKER models. It is crucial to verify fitment against your specific vehicle's year, engine type, and variant using the provided compatibility list and specifications.

How often should I replace spark plugs?

Replacement intervals vary by vehicle manufacturer. Consult your vehicle's owner's manual for the recommended service schedule for spark plug replacement. As a general guideline, they are often replaced every 30,000 to 100,000 miles.

What does 'OE-quality' mean?

OE-quality means the part is manufactured to meet or exceed the standards set by the original equipment manufacturer for your vehicle. This ensures a comparable level of performance, fit, and durability.

What is the electrode gap for the Z243?

The BERU Z243 spark plug has a specified electrode gap of 0.9mm.

Can I adjust the electrode gap?

While some spark plugs can be gapped, it is generally recommended to use them at the factory-set gap (0.9mm for the Z243) unless your vehicle's specific tuning requirements dictate otherwise. Adjusting the gap improperly can affect performance and engine health.

What is the tightening torque for this spark plug?

The recommended tightening torque range for the BERU Z243 spark plug is between 20 Nm and 25 Nm.

What does the 'gasket seat' mean?

A gasket seat refers to the design of the spark plug's base, which includes a crushable gasket. This gasket seals the combustion chamber when the plug is tightened, preventing gas leaks.

Troubleshooting

Engine misfires or runs rough after installation

Verify the spark plug was tightened to the correct torque and that the spark plug wire or coil pack is securely connected. Ensure the correct spark plug part number was used for your vehicle.

Spark plug does not thread easily by hand

Stop immediately and remove the spark plug. Check for cross-threading by re-aligning the plug and threading it by hand. Ensure no debris is in the spark plug hole.

Reduced fuel efficiency

While unlikely to be solely caused by new spark plugs, ensure they were installed correctly and gapped properly. Other factors like driving habits, tire pressure, or engine condition may be contributing.

Difficulty removing old spark plug

Use a penetrating oil and allow it to soak. Ensure the correct size wrench is used and apply steady pressure. If the plug is seized, consult a professional mechanic.

Pros and Cons

Pros

  • Ensures consistent engine performance with OE-quality manufacturing.
  • Designed for a precise fit in compatible Smart and Dacia models.
  • Bulk pack of 10 offers value and convenience.
  • Specific electrode gap optimizes combustion and fuel efficiency.
  • Standardized threading and connector for ease of installation.

Cons

  • Requires careful verification of vehicle compatibility and dimensions before purchase.
  • Not a universal fit; specific to certain vehicle makes and models.
  • Installation requires basic mechanical knowledge and torque specifications.
  • Electrode gap may need adjustment for some specific tuning applications.

Setup, Compatibility & Care

Compatibility Verification: Before installation, meticulously check the vehicle's service manual or consult a parts catalog to confirm that the BERU Z243 (MPN: Z243) is the correct spark plug for your specific vehicle make, model, year, and engine variant. Pay close attention to the "IMPORTANT: Check measurements & dimensions as variations exist" notes. Compare the listed specifications (thread size M12x1.25, thread length 26.5mm, spanner size 14mm, electrode gap 0.9mm) with your vehicle's requirements.

Installation:

  1. Ensure the engine is cool.
  2. Remove the spark plug wire or coil pack from the spark plug.
  3. Use a 14mm spanner to carefully unscrew the old spark plug.
  4. Inspect the new spark plug's electrode gap (0.9mm) and ensure it is correct.
  5. Thread the new BERU Z243 spark plug in by hand to avoid cross-threading.
  6. Tighten the spark plug using the 14mm spanner to the specified torque range of 20-25 Nm. Overtightening can damage the cylinder head, while undertightening can lead to sealing issues.
  7. Reconnect the spark plug wire or coil pack.

Care: Spark plugs are wear items and do not typically require cleaning during their service life. They should be replaced at recommended service intervals as specified by your vehicle manufacturer. If a spark plug is removed for inspection and appears fouled or damaged, it should be replaced.

Price History

DatePrice
Visit shop