Sealey Corner Shower Entry Enclosure - 800 x 800 x 1850mm - 6mm Tempered Glass

The dimensions are 800mm wide by 800mm deep, with a height of 1850mm.

Yes, it can be fitted at ground level, but the floor must be properly prepared, waterproofed, and have adequate drainage to prevent leaks.

The enclosure offers a generous 4cm adjustment range, allowing for flexibility during installation to accommodate uneven walls.

Yes, it features 6mm tempered safety glass certified to EN12150 standards for enhanced durability and user safety.

Use a soft, damp cloth with a mild detergent. Rinse with clean water and dry thoroughly with a soft cloth to prevent water spots.

No, the enclosure is designed to be installed in any direction to best suit your bathroom layout.

Please refer to the Sealey product documentation or contact customer support for specific warranty information, as warranty periods can vary.

Check that all seals are correctly fitted and that the adjustment range has been used to ensure a tight fit against the walls. Ensure the shower tray or floor is properly sealed.

Verify that the enclosure is installed level and plumb. Check for any obstructions or misalignments in the track or roller mechanisms. Adjustments to the frame may be necessary.

Ensure all fixing screws and clamps are securely tightened according to the installation manual. Do not overtighten, which could damage the glass.

Clean the chrome surface with a soft, damp cloth and a mild, non-abrasive cleaner. Dry thoroughly after cleaning. Avoid using harsh chemicals or scouring pads.