Best current price£18.11from B&Q
Shopping.co.uk recommended and popular offers
B&Q£18.11Visit shop B&Q - Metalfix Gash Point Self-Drilling Screws 16mm Washer BzpFjjbgp6303216WPack Of 30Box Of 150
Visit shop1 offer from £18.11
View price history by clicking the chart icon.
For DIY enthusiasts and professionals tackling metal and wood projects, JCP Fixings Metalfix Gash Point Self-Drilling Screws offer a fast and efficient fastening solution. The key benefit is their self-drilling capability, which eliminates the need for pre-drilling, significantly reducing installation time. A potential caveat is ensuring the correct screw size and type are selected for the specific material thickness and load requirements to guarantee optimal performance and security.
| Colour | Silver |
|---|---|
| Model Part Number | Fjjbgp6303216W |
| Brand | JCP Fixings |
These screws are ideal for light gauge metal-to-metal and metal-to-wood applications. They are not recommended for masonry or concrete.
No, the 'Gash Point' design allows the screw to self-drill its own pilot hole in most common metal and wood applications, saving you time.
BZP stands for Bright Zinc Plated. It is a common surface treatment that provides a degree of corrosion and rust resistance, suitable for general indoor or protected outdoor use.
The integrated 16mm washer helps to distribute the clamping force over a wider area, preventing the screw head from pulling through softer materials and providing a more secure fastening.
You will typically need a hex head driver bit, commonly a 1/4 inch (6mm) size, compatible with your power drill or impact driver.
The BZP coating offers moderate corrosion resistance. For environments with high humidity, salt spray, or frequent exposure to the elements, stainless steel or coated screws specifically designed for outdoor use may be more suitable.
Ensure you are using the correct size driver bit and sufficient speed/torque from your power tool. Check that the material is within the intended thickness range for these screws. For very hard materials, consider pre-drilling a small pilot hole.
Apply firm, consistent pressure directly in line with the screw. Ensure the driver bit is fully seated in the screw head and is not worn. Reduce excessive speed or torque if the head begins to deform.
Verify that the screw is long enough to adequately penetrate both materials. Ensure the screw is driven straight and not at an angle. Check that the material is not too brittle or thin, causing pull-through (though the washer helps mitigate this).
Setup: Ensure you are using a power drill or impact driver with a compatible hex head driver bit (typically 1/4 inch or 6mm) for optimal performance. Align the screw with the materials to be joined and apply steady, consistent pressure while driving. The self-drilling tip will create the pilot hole as the screw advances.
Compatibility: These screws are primarily designed for joining light gauge metals and wood. They are compatible with most standard power tools. Ensure the material thickness does not exceed the screw's intended capacity. For very hard or dense materials, pre-drilling may still be beneficial.
Care: Store screws in a dry environment to maintain the integrity of the BZP coating. Avoid exposure to moisture or corrosive chemicals. If the screws become dirty, clean them with a dry cloth. Over-tightening can strip the threads or damage the material, so use appropriate torque settings.
