Best current price£140.05from eBay
Shopping.co.uk recommended and popular offers
eBay£140.05Visit shop Laser Tools Car Jump Starter Booster Pack 12V including Air Pump 5V USB 9344
Visit shop3 offers from £140.05 - £164.94
View price history by clicking the chart icon.
The Laser Tools Multi-Function Car Jump Starter is designed for drivers needing reliable roadside assistance. It offers the primary benefit of jump-starting petrol engines up to 6.0L and diesels up to 4.0L, serving as a robust power bank and an emergency light. A potential caveat is its 6-hour charging time. Key features include a 600A start current, 1200A peak current, USB device charging, built-in LED lights with SOS and strobe functions, and a 150psi tyre inflation pump. Safety is enhanced with multiple protection mechanisms.
| Model Part Number | 9344 |
|---|---|
| Brand | Laser Tools |
The Laser Tools Multi-Function Car Jump Starter takes approximately 6 hours to fully charge from empty using a suitable USB power source and the included USB Type-C cable.
The product information specifies a Li-Po NCM battery, but the exact Amp-hour (Ah) or milliamp-hour (mAh) capacity is not detailed. However, it provides a 600A start current and 1200A peak current.
This jump starter is rated for petrol engines up to 6.0L and diesel engines up to 4.0L. It is not recommended for larger commercial vehicles or engines exceeding these specifications.
The jump starter features a charging indicator that will show the battery's status. Refer to the manual for specific details on how the indicator signals a full charge.
It includes protection against short circuits, overcharging, over-discharging, low voltage, and reverse polarity.
Yes, the built-in 150psi tyre inflation pump is suitable for inflating car tires, though it may take longer than a dedicated air compressor for significant inflation needs.
Yes, the package includes a USB Type-C charging cable.
Ensure the unit is charged. Connect to a power source using the USB-C cable and check the charging indicator. If it still does not power on, contact support.
Verify the clamps are securely attached to the correct battery terminals. Ensure the jump starter has sufficient charge. Try jump-starting again after a short rest for the jump starter. If the issue persists, the vehicle's battery may be critically damaged or there might be another underlying problem.
Check that the pump is switched on and the hose is securely attached to the tire valve. Ensure the jump starter has adequate battery charge. Listen for any unusual noises indicating a blockage.
Confirm the jump starter has sufficient charge. Try a different USB cable and ensure the connected device is compatible with the output. Check the charging indicator on the jump starter.
Ensure the jump starter has sufficient charge. Cycle through the light modes by pressing the power button. If lights still do not activate, there may be an internal issue.
Setup:
Compatibility:
Care:
