ET-60 Lens Hood - HUIPUXIANG
Best current price£17.19from eBay
Best offers
Shopping.co.uk recommended and popular offers
eBay£17.19Visit shop ET-60 Lens Hood Shade for Canon EF 75-300mm f/4-5.6 III,EF black
Visit shopeBay£17.19Visit shop All Offers
2 offers from £17.19
View price history by clicking the chart icon.
eBayET-60 Lens Hood Shade for Canon EF 75-300mm f/4-5.6 III,EF black
Free delivery in 1–3 days
£17.19
Visit shop
ET-60 Lens Hood Shade for Canon EF 75-300mm f/4-5.6 III,EF blackFree delivery in 1–3 days£17.19Visit shop →
Product Information
Full details
The HUIPUXIANG ET-60 Lens Hood is designed for photographers using specific Canon EF and EF-S lenses, offering a crucial benefit of reducing lens flare and protecting the front lens element from damage. While it significantly enhances image quality in bright conditions, it is important to note its specific compatibility limitations, particularly with certain 'STM' lens versions.
All features
| Brand | HUIPUXIANG |
|---|
Extended Product Information
FAQs
Which Canon lenses is the ET-60 hood compatible with?
The ET-60 hood is compatible with the Canon EF 75-300mm f/4-5.6 III, EF 75-300mm f/4-5.6 III USM, EF-S 55-250mm f/4-5.6 IS II, and EF-S 55-250mm f/4-5.6 IS lenses.
Is this hood compatible with the Canon EF-S 55-250mm STM lens?
No, this ET-60 lens hood is specifically not compatible with the EF-S 55-250mm F4-5.6 IS STM version.
What is the primary benefit of using a lens hood?
The primary benefit is to reduce lens flare caused by stray light hitting the lens at an angle, which improves contrast and color saturation. It also provides physical protection to the front lens element.
How do I clean the lens hood?
Use a soft, dry microfiber cloth. For tougher marks, slightly dampen the cloth with water and then dry thoroughly with a clean, dry cloth. Avoid abrasive cleaners.
What material is the lens hood made of?
The lens hood is made of high-quality ABS plastic.
Can the lens hood be reversed for storage?
This hood is designed to be used in the standard, extended position for maximum effectiveness and protection. Reversing it for storage may not be possible or practical depending on the design.
Will this hood cause vignetting?
When used with the compatible lenses listed, this hood should not cause vignetting. Vignetting might occur if used with an incompatible lens or at extremely wide focal lengths if the hood is too deep for the lens's field of view.
Troubleshooting
Hood does not attach securely
Ensure you are using a compatible lens model. Double-check that the hood's mounting tabs are aligned correctly with the lens slots and that you are twisting it firmly into place. If using an incompatible lens, the hood will not mount properly.
Hood rattles or feels loose
Verify that the hood is fully locked in position by twisting it until it clicks. Ensure no debris is obstructing the mounting mechanism.
Image quality is negatively affected (e.g., vignetting)
While rare with correct compatibility, ensure the hood is properly seated. If vignetting (dark corners) occurs, it may indicate incompatibility with a specific focal length or that the hood is not designed for the lens, despite similar naming conventions. Confirm the lens model against the compatibility list.
Pros and Cons
Pros
- Effectively reduces lens flare and ghosting.
- Provides physical protection for the front lens element.
- Constructed from durable ABS plastic.
- Lightweight and unobtrusive design.
- Improves overall photo contrast and color saturation.
Cons
- Not compatible with all Canon EF-S 55-250mm lens variants (specifically STM models).
- Can add slight bulk to the lens setup.
- May not be as robust as original manufacturer hoods in extreme conditions.
Setup, Compatibility & Care
Compatibility: This ET-60 lens hood is designed to fit the following Canon lenses:
- Canon EF 75-300mm f/4-5.6 III
- Canon EF 75-300mm f/4-5.6 III USM
- Canon EF-S 55-250mm f/4-5.6 IS II
- Canon EF-S 55-250mm f/4-5.6 IS
*It is crucial to note that this hood is not compatible with the Canon EF-S 55-250mm F4-5.6 IS STM version.*
Setup: To attach the hood, align the hood's mounting points with the corresponding slots on the front of the compatible lens. Gently push and twist the hood clockwise until it clicks or locks securely into place. To remove, twist counter-clockwise.
Care: Clean the lens hood with a soft, dry cloth. For stubborn smudges, a slightly damp cloth can be used, followed by drying with a soft cloth. Avoid using harsh chemicals or abrasive cleaners, as they can damage the plastic material.