Currently unavailable
This product is not available at the moment. Check back later.
This guide is for homeowners and designers looking to create a modern, stylish showering space. The Milano Nero Wet Room Shower offers a sleek, contemporary look with a large glass screen and a linear tile insert drain, providing a luxurious and functional shower experience. A potential caveat is the need for a suitable, waterproofed wet room floor to be installed.
| Model Part Number | WRGNC2B_var55 |
|---|---|
| Brand | Milano |
A wet room is a bathroom where the showering area is not enclosed by a separate shower tray or cubicle. The entire room is waterproofed, and the shower area is typically delineated by screens or glass panels.
Yes, a wet room requires a specifically prepared floor with a waterproof membrane and a gradient that directs water towards the drain. Professional installation is crucial.
Lift the tile insert (if removable) and clear any debris. Clean the channel with a soft brush and mild detergent. Ensure the drain cover is clear and water flows freely.
The support arm is designed to stabilize the screen. It is typically visible and is intended to be cut to size to fit the specific installation.
This enclosure is specifically designed for wet room installations. Installing it in a non-waterproofed bathroom without proper preparation could lead to water damage.
The main glass panel (screen) is 1200mm wide and 1950mm high.
The glass panels themselves are pre-assembled components. The main assembly involves fitting the panels, support arm, and drain according to the installation guide.
Ensure the floor has the correct gradient towards the linear drain. Check the drain for any blockages. Verify that the waterproofing membrane is intact.
Clean the glass with a dedicated glass cleaner or a mixture of water and vinegar. Use a squeegee after cleaning and drying with a soft cloth to prevent streaks.
Check the hinge mechanism for any debris. Adjust hinge screws if necessary, following the manufacturer's instructions. If damage is suspected, contact customer support.
Ensure the support arm is securely fixed to both the wall and the glass panel. Verify that the arm was cut to the correct length and properly installed according to the manual.
Avoid using abrasive cleaners or solvents on the black profile. Clean with a soft, damp cloth. If the issue persists, consult the manufacturer's warranty information.
Setup:
Compatibility:
Care:
