Best current price£190.56from fc-moto.uk
Shopping.co.uk recommended and popular offers
fc-moto.uk£190.56Visit shop Sw-Motech Orange Upper Crash Bar For Orig. Ktm Crash Bar - 1290 Sadv R / S (16-), 1090 Adv (16-).
Visit shop4 offers from £190.56 - £259.44
View price history by clicking the chart icon.
Designed for adventure riders of the KTM Super Adventure 1290 (2017-2020), these SW Motech upper crash bars provide crucial defense for your motorcycle's radiator and fairing during accidental tip-overs or low-speed slides. While they offer robust steel construction and a precise bike-specific fit, riders should note that this kit serves as an upper reinforcement system and does not replace the requirement for lower crash bars or additional auxiliary lighting components.
| Model Part Number | SBL.04.879.10001/O |
|---|---|
| Brand | SW Motech |
This specific part number is designed exclusively for the KTM Super Adventure 1290 model years 2017 through 2020.
No, these bars are not equipped with dedicated mounting points for auxiliary driving lights. You would need additional clamps if adding lights.
Installation generally does not require full removal of the fairings, but you may need to loosen certain fasteners to access the frame mounting points.
The high-quality powder coating is resistant to UV damage and weathering, maintaining its color and integrity under normal exposure conditions.
The bars are designed to allow access to the engine and essential maintenance points without requiring removal of the guards.
Loosely install all mounting bolts before fully tightening any single point to allow for minor adjustments and stress-free alignment.
Use a touch-up paint specifically designed for steel powder coating to seal the area and prevent rust from forming on the exposed metal.
The installation utilizes the factory mounting points on your KTM Super Adventure 1290. Ensure you have a standard set of metric hex keys and a torque wrench available for the procedure. Before final tightening, verify that the bars are aligned correctly with the existing fairings to ensure proper clearance. Regarding care, periodically inspect all mounting bolts to ensure they remain tight, especially after heavy off-road use. The powder-coated surface can be cleaned with standard mild soap and water; avoid using harsh chemical solvents that might degrade the protective finish.
