FAI Handbrake Cable - FBC0150
Best current price£13.96from eBay
Best offers
Shopping.co.uk recommended and popular offers
eBay£13.96Visit shop FAI FBC0150 Parking Brake Cable Pull Rear Left Right Fits Seat Skoda VW
Visit shopeBay£13.96Visit shop All Offers
2 offers from £13.96 - £18.53
View price history by clicking the chart icon.
eBayFAI FBC0150 Parking Brake Cable Pull Rear Left Right Fits Seat Skoda VW
Free delivery in 1–3 days
£13.96
Visit shop
FAI FBC0150 Rear Handbrake Cable Fits Seat Skoda Vw Cordoba Fabia Fox Ibiza PoloFree delivery in 1–3 days£18.53Visit shop →
Product Information
Full details
This FAI Handbrake Cable (FBC0150) is designed for owners of specific VW Polo IV and Seat Ibiza models needing a reliable, OE-quality replacement for their parking brake system. Its key benefit is restoring secure parking functionality with a durable, precisely engineered part. A potential caveat is that installation requires mechanical knowledge or professional assistance.
All features
| Model Part Number | FBC0150 |
|---|---|
| Brand | FAI |
Extended Product Information
FAQs
What vehicles is the FAI Handbrake Cable FBC0150 compatible with?
It is compatible with VW Polo IV models (2001-2012) with 1.2, 1.4, and 1.9 engines, and Seat Ibiza models (2002-2009) with 1.2, 1.4, 1.6, and 1.9 engines.
Does this cable fit both rear left and rear right sides?
Yes, this cable is designed to fit as either the rear left or rear right parking brake cable. You may need to purchase two if both sides require replacement.
What is the expected lifespan of a handbrake cable?
The lifespan varies greatly depending on usage, environmental conditions, and maintenance. However, cables typically last several years. It's important to inspect them periodically for wear and tear.
How do I know if I need to replace my handbrake cable?
Symptoms include a handbrake lever that pulls up much higher than usual, a loose or spongy feel, or the handbrake not holding the vehicle securely when parked.
Can I install this cable myself?
Installation requires mechanical knowledge and proper tools, including the ability to safely lift and support the vehicle. If you are not experienced, professional installation is recommended.
What happens if I don't replace a worn handbrake cable?
A worn handbrake cable can lead to the parking brake failing, which poses a significant safety risk, potentially causing the vehicle to roll when parked.
Troubleshooting
Handbrake lever feels loose or requires excessive travel.
The cable may be stretched or incorrectly adjusted. Check the cable tension adjustment at the handbrake mechanism and adjust as per the vehicle's service manual. If adjustment is at its limit, the cable may need replacement.
Handbrake does not hold the vehicle effectively.
This could indicate a worn cable, improperly adjusted tension, or issues with the brake shoes/pads or drums/calipers. Ensure the cable is correctly tensioned and that the braking components themselves are in good condition. If the cable is the suspected fault, replacement is necessary.
Cable is difficult to route or connect.
Ensure the correct cable is being used for the specific vehicle model and year. Double-check routing to avoid kinks or obstructions. Make sure mounting points are clean and free of debris.
Pros and Cons
Pros
- Ensures reliable parking brake operation.
- Direct replacement for specified VW and Seat models.
- Built to OE quality standards for durability.
- Helps maintain vehicle safety and compliance.
Cons
- Requires professional installation or mechanical expertise.
- Only compatible with specific engine variants and model years.
- A single cable; some vehicles may require two for complete replacement (check existing setup).
Setup, Compatibility & Care
Compatibility:
This FAI Handbrake Cable FBC0150 is designed for:
- VW Polo IV: Models manufactured between 2001 and 2012, specifically with 1.2L, 1.4L, and 1.9L engines.
- Seat Ibiza: Models manufactured between 2002 and 2009, specifically with 1.2L, 1.4L, 1.6L, and 1.9L engines.
This cable fits either the rear left or rear right side of the vehicle. It is recommended to check your vehicle's existing setup to determine if one or two cables are needed for a complete replacement.
Setup (Installation):
Installation of a handbrake cable is a mechanical procedure that typically requires:
- Lifting the Vehicle: Safely support the vehicle on jack stands.
- Accessing the Cable: Remove any necessary underbody panels or components to reach the cable.
- Disconnecting Old Cable: Unhook the old cable from the handbrake mechanism and the brake caliper or drum.
- Installing New Cable: Route the new FAI Handbrake Cable FBC0150 in the same path as the old one, ensuring it is not kinked.
- Connecting New Cable: Securely attach the new cable to the handbrake lever assembly and the brake system.
- Adjusting Cable Tension: Adjust the cable at the handbrake lever or relevant linkage to achieve the correct tension. Refer to the vehicle's workshop manual for specific adjustment procedures.
- Testing: Lower the vehicle and test the handbrake operation thoroughly.
Professional installation is highly recommended if you are not experienced with automotive brake systems.
Care:
Handbrake cables are generally maintenance-free. However, ensure the cable operates smoothly without binding. Keep the area around the cable and its connection points clean. Periodically check the cable for any signs of fraying, corrosion, or damage, especially after driving in harsh conditions (e.g., heavy salt exposure). If any damage is noted, replace the cable immediately.