Bosch PRO Wood Circular Saw Blades - 190 mm

These blades are optimized for cutting softwood and hardwood. They are not recommended for metal, masonry, or plastics.

The blades are designed for a standard 190 mm circular saw, typically with a specific arbor size (e.g., 20 mm or 30 mm, check your saw's specifications).

Use a resin remover spray or a degreaser. Apply the cleaner, let it sit for a few minutes, and then scrub the teeth with a stiff brush. Rinse and dry thoroughly.

Yes, these blades are designed to handle both rip cuts (with the grain) and crosscuts (across the grain) effectively in wood.

Replacement frequency depends on usage. Replace the blade when you notice a decline in cut quality, increased effort required, or visible damage to the teeth.

These are specified as circular saw blades. While tooth count and design can overlap, it's best to use blades specifically designed for table saws for optimal performance and safety.

Ensure the blade is correctly installed and tightened. Check for resin buildup on the teeth and clean if necessary. If the blade is dull or damaged, it may need replacement.

Verify that the blade is properly seated on the spindle and the mounting nut is tight. Ensure the blade is not warped or damaged. Check if the saw's motor is functioning correctly.

Check for obstructions or binding in the material being cut. Ensure the blade is sharp and free of debris. The saw's motor might be overheating or underpowered for the task if the issue persists with a sharp, clean blade.