Speedfit Coupler - JG Speedfit
Best current price£14.81from B&Q
Best offers
Shopping.co.uk recommended and popular offers
B&Q£14.81Visit shop B&Q - Coupler 22mm X
Visit shopB&Q£14.81Visit shop One Offer
1 offer from £14.81
View price history by clicking the chart icon.
Product Information
Full details
This guide is for anyone using the JG Speedfit brass male coupler, a push-fit fitting designed for quick and easy connections in plumbing and heating systems. The primary benefit is the speed and ease of installation, especially in tight spaces, eliminating the need for hot works. Keep in mind that while it's compatible with various pipe materials, specific inserts are needed for plastic pipes.
All features
| Brand | JG Speedfit |
|---|
Extended Product Information
FAQs
What pipe materials are compatible?
The JG Speedfit brass male coupler is compatible with Speedfit PEX and polybutylene plastic pipe (with inserts) and copper pipe.
Do I need any special tools for installation?
You may need a pipe cutter to ensure a clean cut on the pipe ends.
How do I know if the pipe is fully inserted?
You should feel a positive stop when the pipe is fully inserted into the fitting. Ensure the pipe reaches the internal stop within the fitting.
Can I reuse the fitting?
The fitting can be reused if demounted carefully and if it is still in good condition. Inspect the fitting for any damage before reusing.
What is the operating temperature range?
The JG Speedfit fittings are suitable for both hot and cold water applications. Check the pipe specifications for temperature limits.
What if the threads don't seal properly?
Ensure the threads are compatible and clean. Use thread sealant tape or paste if needed, but do not overtighten.
Troubleshooting
The fitting is leaking.
Ensure the pipe is fully inserted and seated correctly. Check the threads and tighten if necessary. If the leak persists, replace the fitting.
The pipe won't insert.
Check that the pipe end is cut cleanly and is free of burrs or damage. Ensure the correct insert is used for plastic pipes. Lubrication can sometimes help.
Difficult to demount.
Make sure you are pushing the collet in towards the fitting's body while pulling the pipe.
Pros and Cons
Pros
- Quick and easy installation, saving time and labor.
- No need for hot works, reducing safety risks.
- Compatible with a wide range of pipe materials.
- Suitable for various applications, including hot and cold water and central heating systems.
Cons
- Requires specific inserts for plastic pipes, adding an extra step.
- May require more force to connect initially compared to some other methods.
Setup, Compatibility & Care
- Preparation: Ensure the pipe ends are clean and free from any debris.
- Compatibility: Check that the pipe material is compatible (Speedfit PEX/polybutylene with inserts, or copper pipe).
- Insertion: Push the pipe firmly into the push-fit end of the coupler until it's fully seated.
- Securing the Thread: Tighten the male thread to the corresponding fitting.
- Demounting: To disconnect, push the collet towards the body of the fitting and pull the pipe.
- Care: Inspect the connections periodically for any leaks.