Best current price£56.99from eBay
Shopping.co.uk recommended and popular offers
eBay£56.99Visit shop Hobbywing Quicrun WP 10BL120 G2 Brushless Sensorless ESC HW30107200 XT-60
Visit shop5 offers from £56.99 - £86.49
View price history by clicking the chart icon.
The Hobbywing Quicrun WP 10BL120 G2 ESC is designed for RC enthusiasts looking for a durable and high-performance electronic speed controller for their trucks and truggies. Its key benefit is its IP67 waterproof and dustproof rating, allowing for operation in challenging environments. A potential caveat is its specific suitability for sensorless brushless motors.
| Model Part Number | 30107200 |
|---|---|
| Brand | Hobbywing |
Yes, it has an IP67 rating, which means it is dust-tight and protected against immersion in water up to 1 meter for 30 minutes. However, it's recommended to rinse with clean water and dry thoroughly after exposure to salt water or corrosive liquids.
This ESC is designed exclusively for sensorless brushless motors.
No, this ESC is rated for 2S to 4S LiPo batteries only. Using higher voltage batteries can cause permanent damage.
The BEC output voltage is adjustable between 6V and 7.4V. This is typically done via programming, either using a separate programming card or through specific transmitter commands, depending on the ESC's firmware version and available features.
No, the WP 10BL120 G2 comes with a large built-in capacitor (1640uF), making external capacitors unnecessary for most 1:10 scale applications.
Refer to the product manual for a detailed explanation of the LED indicator codes, which signify different states and error conditions.
Check battery connections for correct polarity. Ensure the battery is charged. Verify the ESC is properly connected to the receiver.
Reverse any two of the three motor wires connected to the ESC. Ensure the ESC is properly calibrated to the transmitter's throttle endpoints.
Ensure the fan is spinning freely and not obstructed. Clean the heatsink and motor. Check for proper motor-to-ESC wire gauge and length. Reduce load or driving time if operating in extreme conditions.
Ensure the LiPo battery has sufficient charge. Check the ESC's low voltage cut-off setting to ensure it's appropriate for your battery's minimum safe voltage.
Setup:
Ensure the ESC is correctly paired with a compatible sensorless brushless motor. Connect the three motor wires from the ESC to the motor, noting that reversing any two wires will reverse the motor's direction.
Connect the battery to the ESC's input wires, observing correct polarity. Connect the ESC's receiver wire to the throttle channel on your RC receiver.
Compatibility:
Care:
After use in wet or dirty conditions, rinse the ESC with clean water and dry it thoroughly. Avoid using high-pressure water jets directly on the unit. Periodically check the fan and heatsink for debris and clean as necessary. Ensure all connections are secure and free from corrosion.
