Waterproof Patio Sun Shade Sail Canopy - Kookaburra - Red
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This Kookaburra Waterproof Patio Sun Shade Sail Canopy is designed for homeowners seeking robust protection from sun and rain. Its key benefit is offering UPF 50+ certified, near-impenetrable sunlight blockage (over 98% of UV rays) while also providing shelter from rain, thanks to its waterproof capabilities and tightly woven fabric. A potential caveat is that while it allows hot air to escape, intense direct sun during peak heat might still feel warm if airflow is limited.
All features
| Colour | Red |
|---|---|
| Brand | Kookaburra |
Extended Product Information
FAQs
What is UPF 50+?
UPF 50+ stands for Ultraviolet Protection Factor and indicates that the fabric blocks over 98% of harmful UV rays. It is a measure of fabric's effectiveness against UV radiation.
Can this shade sail withstand strong winds?
While designed for durability, extreme wind conditions can damage the sail or anchor points. It is recommended to take down the sail during severe weather warnings.
How do I clean the shade sail?
The shade sail is machine washable at 40°C. For lighter cleaning, use a damp cloth and mild detergent. Ensure it is fully dry before storing.
Is the colour 'Red' fade-resistant?
The material is UV-stabilised, which helps to resist fading. However, prolonged and intense sun exposure may still cause some gradual fading over time.
What material is the shade sail made of?
It is made from high-density, UV-stabilised polyester with a weight of 160gsm.
How is the shade sail attached?
It features Grade 304 stainless steel D-rings at each corner and straps along each side for tensioning and attachment to anchor points.
Can I leave this shade sail up all year round?
While the material is rot-proof and durable, for optimal longevity and safety, it is advisable to take the sail down during harsh winter months or severe weather.
Troubleshooting
Water pooling on the sail
Ensure the sail is installed with a sufficient slope to allow water to run off. Check that tensioning straps are tight and evenly distributed.
Sail sagging
Tighten the tensioning straps at each corner. Ensure anchor points are secure and not pulling away.
Fabric appears dirty or has mildew spots
Clean the sail by machine washing at 40°C or spot clean with a damp cloth and mild soap. Allow to dry completely before re-installation or storage.
D-rings feel loose
Inspect the D-rings and their attachment points for any damage. If the issue persists, consider replacing the D-ring or reinforcing the attachment point.
Pros and Cons
Pros
- Excellent UV protection (UPF 50+)
- Effective rain shelter
- Durable and rot-proof material
- Easy to clean
- Secure installation with D-rings and straps
Cons
- May still feel warm in direct, intense sun if airflow is restricted
- Requires secure anchor points for installation
- Color may fade over extended periods of direct sunlight (though UV-stabilised)
Setup, Compatibility & Care
Setup: To set up your Kookaburra shade sail, identify strong anchor points such as sturdy posts, existing structures (walls, pergolas), or dedicated anchor kits. Use the stainless steel D-rings at each corner and the provided straps to attach the sail. Ensure the sail is tensioned correctly to prevent sagging and water pooling. A slight slope is recommended for effective water runoff.
Compatibility: This shade sail is compatible with various outdoor structures and anchor points. Ensure your chosen anchor points can withstand the tension required to keep the sail taut, especially in windy conditions. It is suitable for patios, gardens, balconies, and carports.
Care: To clean the shade sail, machine wash it at 40°C. For spot cleaning, use a damp cloth and mild soap. Avoid harsh chemicals or abrasive cleaners that could damage the fabric. Ensure the sail is completely dry before storing to prevent mildew. Periodically check tensioning straps and D-rings for wear and tear.