Best current price£100.17from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£100.17Visit shop Kronospan Grey Galaxy Upstand 3000 X 100 X 20Mm 3215000707898
Visit shop
B&Q£1,218.08Visit shop - 3.0X5.4M Complete Value Decking Kit With Colonial Handrail/balustrade
Visit shop2 offers from £100.17 - £1,218.08
View price history by clicking the chart icon.
This guide is for homeowners and DIY enthusiasts looking to add a stylish and durable finishing touch to their kitchen or bathroom surfaces. The Kronospan Grey Galaxy Upstand offers a modern aesthetic with a hard-wearing laminate finish, providing a key benefit of enhanced visual appeal and protection. A potential caveat is that its specific dimensions may require precise cutting for non-standard installations.
| Brand | B&Q |
|---|
An upstand serves as a protective splashback and a decorative finishing element between a countertop and the wall, preventing moisture and debris from entering gaps.
Yes, the laminate can be cut to size using appropriate tools. It is recommended to use a fine-tooth saw for clean cuts and to measure precisely before cutting.
A strong contact adhesive suitable for laminates and the chosen substrate material is recommended. Always refer to the adhesive manufacturer's guidelines for application and curing.
Wipe with a soft, damp cloth. Mild, non-abrasive household cleaners can be used if necessary, followed by rinsing with a clean damp cloth and drying.
The laminate surface is water-resistant. However, the bond between the laminate and its substrate, and the seal at the wall, should be robust to prevent water ingress.
The upstand has a thickness of 20mm.
While primarily designed as an upstand at the countertop level, its durable finish could be adapted for partial or full-height backsplashes with appropriate substrate and bonding considerations.
Ensure surfaces are clean, dry, and free from dust or grease. Use the recommended adhesive for laminates and follow curing times. Maintain appropriate room temperature during application.
Use a sharp, fine-tooth saw blade designed for laminate or particle board. Score the laminate lightly before making the full cut. Support the laminate securely to prevent vibration.
Check that the substrate is perfectly flat and smooth. Ensure even pressure is applied during the bonding process. Allow adequate curing time before removing clamps or weights.
Setup: This upstand is intended to be bonded to a suitable support substrate, such as MDF or plywood, using an appropriate adhesive. Ensure both the substrate and the back of the laminate are clean, dry, and free from dust. Cut the upstand to the required length using a fine-tooth saw for clean edges. Apply adhesive evenly and press firmly into place, using clamps or weights if necessary while the adhesive cures. For best results, always follow the adhesive manufacturer's instructions.
Compatibility: Designed for use with standard kitchen and bathroom countertops. It connects to a substrate, making it a versatile component for custom surfaces. Ensure the substrate material is stable and suitable for bonding.
Care: To maintain its appearance, wipe clean with a soft, damp cloth. Avoid abrasive cleaners or scouring pads, which can scratch the laminate surface. For stubborn marks, use a mild detergent diluted in water, followed by a clean damp cloth and then dry thoroughly.
