Best current price£15.00from eBay
Shopping.co.uk recommended and popular offers
eBay£15.00Visit shop Truma Combi Ultrastore Hot Water Heater Elbow Fitting 10mm C3402/6002 Caravan
Visit shopeBay£19.95Visit shop TRUMA ULTRASTORE WATER HEATER 10MM ELBOW FITTING BREATHER PIPE CARAVAN MOTORHOME
Visit shop13 offers from £15.00 - £19.95
View price history by clicking the chart icon.
The Truma Hot Water Elbow Fitting (34150-01) is designed for owners of Truma Ultrastore and Combi water heating systems looking to simplify their plumbing setup and improve connection reliability. This updated elbow fitting replaces restrictive straight-pipe configurations to provide a more ergonomic connection to 10mm or 12mm flexible piping, though it is specifically engineered for precise fitment within Truma water heating architectures. It serves as an essential upgrade for caravan and motorhome water system maintenance, ensuring secure, leak-free routing for your hot water supply.
| Model Part Number | MC6DB6800001 |
|---|---|
| Brand | Truma |
Yes, this fitting is designed to be compatible with both 10mm and 1/2 inch (12mm) flexible piping.
The no-return valve is integrated into the assembly to ensure system safety and should not be removed.
The breather tube assists in the efficient venting of air from the water heating system, which helps maintain steady flow and pressure.
This fitting is specifically engineered for Truma Ultrastore and Combi systems and is not recommended for other brands.
It is good practice to inspect the fitting for leaks or mineral buildup at the start of every camping season.
Check that the hose clamp is tight and that the flexible pipe has not been cut or cracked during installation.
Ensure the breather tube is not obstructed and the no-return valve is not blocked by debris.
Check that the breather tube is clear and properly installed to allow air to vent from the heating chamber.
To install, ensure the water system is fully depressurized and drained. The fitting is designed to accept 10mm flexible tubing; if using 12mm (1/2 inch) tubing, ensure the connection is seated firmly over the barb before securing it with an appropriate hose clip. Always verify that the breather tube is positioned upwards to prevent air locks. Care should be taken not to overtighten connections, as this can deform the plastic fittings. Periodically inspect the connection for signs of calcification or mineral buildup, especially if the vehicle is stored in areas with hard water, to ensure the no-return valve continues to seat properly.
