Hoover HLE C9DG-80 Condenser Tumble Dryer - 9kg Capacity

A condenser tumble dryer collects the moisture from your wet clothes into a removable water tank, rather than expelling it through an external vent. This allows for more flexible placement of the appliance within your home.

It is recommended to empty the water tank after every drying cycle. The dryer will typically have an indicator light that illuminates when the tank is full and needs emptying.

The lint filter is usually located inside the dryer door opening. Pull it out, remove any lint by hand or with a soft brush, and then reinsert it. This should be done after every cycle for optimal performance and safety.

The Hoover HLE C9DG-80 is versatile. It has specific programs for various fabrics, including a Woolmark Certified program for delicate woolens and an Anti-Allergy program. Always check the care labels on your garments and select the appropriate dryer setting.

The Wizard App provides smart control over your dryer. You can start or pause cycles, monitor progress, receive notifications, and access additional drying programs directly from your smartphone, even when you're away from the appliance.

Woolmark Certification means the dryer has been tested and approved to safely dry wool garments labeled 'hand wash only' or 'machine wash wool' without shrinking or damage, when the specific wool program is used.

The Anti-Allergy program uses specific temperature and cycle durations to effectively neutralize common allergens such as dust mites, pet hair, pollens, and residual detergent from your clothes, providing a more hygienic drying solution.

The approximate dimensions of the Hoover HLE C9DG-80 are 850mm (Height) x 596mm (Width) x 607mm (Depth, excluding knobs and door).

Check if the power plug is securely in the wall socket. Ensure the door is fully closed and latched. Verify that the water tank is not full and the lint filter is clean. If using the Start Delay function, ensure it has not been inadvertently activated.

Ensure the lint filter is clean before each cycle. Check if the water tank needs emptying. Do not overload the dryer; reduce the load size. Make sure you've selected the correct program for the fabric type and desired dryness level. Periodically clean the condenser unit.

This could indicate a sensor issue. First, thoroughly clean the water tank and its housing to ensure no debris is blocking the sensor. If the problem persists, consult the user manual or contact customer support.

Ensure the dryer is placed on a firm, level surface and that its feet are properly adjusted. Check for any foreign objects (like coins or buttons) that might be trapped inside the drum or lint filter area. Avoid overloading the machine.

Ensure your dryer is powered on and your smartphone is connected to a stable Wi-Fi network. Check that you have the latest version of the Wizard App installed. Try restarting both your phone and the dryer. Refer to the app's troubleshooting section for specific connection issues.