Best current price£24.85from eBay
Shopping.co.uk recommended and popular offers
eBay£24.85Visit shop Oxford Eyeshot Universal Motorcycle LED Rear 3 in 1 Tail Brake Plate Stop Light
Visit shop8 offers from £24.85 - £54.74
View price history by clicking the chart icon.
The Oxford Universal Motorcycle 3-in-1 LED Tail Light (EL343) is designed for riders seeking a compact, reliable lighting solution that consolidates tail, brake, and number plate illumination into a single unit. It is an ideal upgrade for those looking to modernize their bike's rear lighting profile with 23 high-intensity LEDs. While it offers a universal design, users should note that depending on the bike's specific mounting location and electrical system, some custom wiring or fabrication of a mounting bracket may be required for a seamless installation.
| Model Part Number | EL343 |
|---|---|
| Brand | Oxford |
This unit is designed as a universal aftermarket part; please check your local traffic laws regarding lighting compliance before installation.
No, this unit is designed for standard 12V motorcycle electrical systems.
No, the EL343 is a universal light unit. You may need to fabricate or adapt a bracket based on your specific motorcycle's mounting points.
Generally, the wires correspond to a common ground, a running light positive, and a brake light positive. Use a multimeter to confirm which wire on your bike provides 12V during braking versus running mode.
Yes, it is a sealed-for-life unit designed to be resistant to rain, road spray, and wash water.
The unit measures 120mm in length, 32mm in width, and 35mm in height.
Verify that the wiring connections are correct and that the ground wire is securely attached to a clean, metal chassis point.
Check your brake switch adjustments at the hand lever and foot pedal; the switch may be stuck or out of calibration.
If replacing incandescent bulbs, your bike's flasher relay may require an LED-compatible load resistor or a dedicated LED relay to manage the lower power draw.
Installation requires basic electrical knowledge, as the unit comes with universal flying leads. You will need to identify your bike's original tail light wiring (Ground, Tail/Running Light, and Brake Light) and splice these connections appropriately, preferably using heat-shrink connectors for a weatherproof seal.
This is a universal part measuring 120mm x 32mm x 35mm. Before purchasing, ensure your bike's rear mudguard or tail piece provides a flat or compatible surface area of at least these dimensions.
Since the unit is sealed, it requires no internal maintenance. To keep the lens clear, use a microfiber cloth and mild soapy water to remove road grime. Avoid using harsh chemical solvents or abrasive cleaners that may cloud the plastic housing.
