VEVOR Anhängerschloss - THS003
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
The VEVOR Anhängerschloss (THS003) is designed for owners of trailers, RVs, and boats seeking a reliable theft-deterrent solution for their parked vehicles. Crafted from 8mm thick carbon steel, it provides a formidable physical barrier for various ball coupler sizes; however, it is intended strictly for stationary use and must be removed before operating the vehicle on the road.
All features
| Model Part Number | THS003 |
|---|---|
| Brand | VEVOR |
Extended Product Information
FAQs
Can I use this lock while driving?
No, this product is strictly for stationary security and must be removed before towing.
Which ball sizes does it fit?
It is compatible with 1-7/8 inch, 2 inch, and 2-5/16 inch flat ball couplers.
Is the lock weatherproof?
Yes, it is treated with a durable surface coating to resist rust and environmental damage.
What should I do if I lose all four keys?
Since this is a high-security lock, we recommend keeping your spare keys in separate, secure locations. If all are lost, a professional locksmith may be required to open the device.
Does it weigh a lot?
The unit weighs approximately 3.1kg, reflecting its sturdy, high-density steel construction.
Troubleshooting
The lock is difficult to turn or seems stuck.
Apply a small amount of graphite lubricant or silicone spray into the lock cylinder and insert the key to work it back and forth.
The lock does not sit flush on the coupler.
Ensure that the coupler handle is in the fully locked or released position as intended by the lock design, and verify that there is no debris inside the cavity.
Pros and Cons
Pros
- Heavy-duty carbon steel build provides high impact resistance
- Versatile design fits multiple standard coupler sizes
- Includes four keys to ensure you always have a spare
- Simple, intuitive installation process
- Protects both the coupler and the safety chains
Cons
- Not intended for use while the trailer is in motion
- Weight of 3.1kg makes it heavier than some lighter-duty aluminum locks
- Requires manual alignment during installation
Setup, Compatibility & Care
To install, ensure the trailer is on a level surface. Slide the lock body over the hitch coupler until it seats firmly. Select the correct locking position for your specific hitch size (1-7/8", 2", or 2-5/16"). Once in place, insert the key to lock the mechanism. To maintain the device, occasionally wipe down the exterior to remove dirt and apply a silicone-based lubricant to the keyhole to ensure smooth operation, especially after exposure to rain or salt air.