Colron Refined Wood Dye - English Light Oak - 250Ml

The wood surface must be clean, dry, and free from old finishes or sealants. Lightly sand the surface to ensure the dye penetrates evenly.

You can apply the dye using a clean cloth or a sponge.

The dye typically dries in approximately 1 hour.

Yes, this dye is suitable for both hard and soft woods.

Yes, it is recommended to apply a topcoat, such as varnish or lacquer, to protect the dyed surface and enhance durability.

Always test the dye on a small, hidden area first. The final color may vary depending on the wood type. Apply additional coats to deepen the color, and sand lightly if the color is too dark.

Ensure even application by applying the dye in a consistent manner, following the wood grain. If needed, apply a second coat.

Apply a second coat of dye, allowing each coat to dry completely before the next application. Note that multiple coats will deepen the color.

If the color is too dark, you can lighten it by sanding the surface lightly after the dye has dried.