Setup, Compatibility & Care
Compatibility:
This filter is specifically designed for the Russell Hobbs RHSLDW1B Dishwasher.
Setup/Installation:
- Ensure the dishwasher is turned off and unplugged.
- Open the dishwasher door.
- Locate the filter assembly at the bottom of the dishwasher interior, typically in the center.
- Rotate the existing filter (usually counter-clockwise) to unlock and remove it.
- Separate the outer mesh filter from the inner debris filter if they are connected.
- Clean the filter housing area of any accumulated debris.
- Clean the new outer mesh and inner debris filters under running water.
- Reassemble the new outer mesh and inner debris filters if necessary.
- Insert the new filter assembly back into its housing and rotate it (usually clockwise) to lock it in place.
- Close the dishwasher door and reconnect power.
Care:
- Regular Cleaning: It is recommended to clean the filter after every few wash cycles, or more frequently if you wash heavily soiled dishes. Rinse under hot running water, using a soft brush if necessary to remove stubborn debris.
- Deep Cleaning: Periodically, remove the filter and soak it in warm, soapy water to remove any grease or buildup. Ensure it is thoroughly rinsed before reinstallation.
- Inspection: Check the filter for any damage regularly. If cracks or significant wear are present, replace the filter immediately.