Best current price£32.39from Viking UK
Shopping.co.uk recommended and popular offers
Viking UK£32.39Visit shop 3M Cool Flow Valve Respirator White Valved Pack Of 10
Visit shop3 offers from £32.39 - £77.62
View price history by clicking the chart icon.
2 offers from £38.05 - £80.95
View price history by clicking the chart icon.
The 3M 6502QLKIT-1 is a reusable half-face respirator designed for professionals and DIY enthusiasts needing robust protection against organic gases, vapours, and particulates. Its key benefit is the reliable A2P3 filtration, offering a high level of safety during tasks like spray painting, sanding, or working with chemicals. A potential caveat is the need for proper fit and filter replacement for optimal performance.
| Brand | 3M |
|---|
A2 refers to protection against certain organic gases and vapours at medium concentrations (e.g., solvents in paints). P3 refers to protection against fine dust, mists, and aerosols with a high level of filtration (99%).
Replace A2 gas filters when you can detect an odour or taste of the contaminant, or if breathing becomes noticeably difficult. Replace P3 particulate filters when they appear clogged, damaged, or breathing becomes difficult.
While the P3 filters offer particulate protection, the A2 filters are designed for organic vapours. For water-based paints, particulate filtration is key, and you might consider different filter combinations based on specific product safety data sheets.
The respirator body should be cleaned with mild soap and water after each use. The silicone face seal should also be cleaned regularly.
The Quick Latch mechanism allows you to easily lower the respirator from your face without removing the head straps, which is convenient for temporary breaks or communication.
Yes, the respirator is designed for comfort during extended wear, featuring an adjustable head strap, a flexible silicone face seal, and a Cool Flow™ exhalation valve to reduce heat and moisture buildup.
The kit typically includes the 3M™ 6502 half-face respirator body, a pair of 3M™ 6055 A2 filters, a pair of 3M™ 5935 P3 filters, and a pair of 3M™ 501 filter retainers.
Ensure the face seal is clean and undamaged. Adjust the head straps for a tighter fit. Perform a user seal check according to the instructions. Consider if the respirator size is appropriate for your face shape.
Check if the filters are clogged or have exceeded their service life. Ensure filters are correctly attached. If the problem persists, replace the filters.
This indicates that the A2 gas filters may be saturated or bypassed. Replace the A2 gas filters immediately.
Inspect the exhalation valve for debris or damage. Gently clean the valve area. If the valve is damaged, the respirator may need replacement.
Adjust the head straps for a balanced fit, ensuring it's snug but not overly tight. Ensure the silicone face seal is clean and sits correctly on the skin.
Setup:
Compatibility:
Care:
