Bosch Professional Planer - GHO 20-82 - 700 W - 230V

The maximum planing depth for the Bosch Professional GHO 20-82 Planer is 2mm per pass.

Yes, the planer is optimized for both right- and left-handed operation with dual-sided chip ejection.

Please refer to the official Bosch Professional warranty documentation for specific details regarding the warranty period and coverage.

Always unplug the tool first. Use the included assembly wrench to loosen the blade securing screws, remove the old blades, and install new ones. Ensure they are tightened securely.

The package typically includes the planer, a dust bag, an assembly wrench, and a parallel guide.

The maximum rebating depth achievable with this planer is 9mm.

Keep the planer clean, especially the base plate and ventilation slots. Regularly check and replace the blades as needed. Store the tool in a dry environment.

Check that the power cord is securely plugged into a functioning outlet. Ensure the safety switch is engaged.

Ensure the base plate is clean and free from debris. Check that the blades are sharp, correctly installed, and at the same height. Verify the depth setting is consistent.

Ensure the dust bag is properly attached and not full. Check for any blockages in the chip ejection port or airflow path. Clean the tool thoroughly after use.

Ensure the blades are sharp and correctly installed. Do not attempt to remove too much material in a single pass; reduce the planing depth. Make sure the tool's ventilation is not obstructed.