Robens Air Impact 25 Self Inflating Mat - Nylon

Unroll the mat and open the valve. Allow the mat to self-inflate. You may need to add additional air manually to reach your desired firmness by blowing into the valve.

Open the valve and roll the mat from the foot end towards the valve, squeezing out the air. Close the valve when finished.

Wipe the mat with a damp cloth and mild soap. Rinse with clean water and allow it to air dry completely before storing.

The mat has an R-Value of 2.1, which is suitable for temperatures around 2 degrees C. For colder conditions, consider using an additional insulated layer or a mat with a higher R-value.

Use a repair kit to patch the puncture. Follow the instructions provided in the kit. If the puncture is too large, consider contacting the manufacturer.

Store the mat unrolled with the valve open in a cool, dry place.

Contact the retailer or the manufacturer to inquire about the warranty.

Ensure the valve is open and allow sufficient time for self-inflation. You may need to add air manually to reach the desired firmness.

Check the valve for debris or damage. Inspect the mat surface for punctures and use a repair kit if needed.

Clean the valve and ensure it is free from obstructions. If the valve is damaged, consider contacting the manufacturer for a replacement.