Best current price£9.67from B&Q
Shopping.co.uk recommended and popular offers
B&Q£9.67Visit shop B&Q - Ibc Tank Fitting Adapter Selection Cap Tail Valve Connector Outlet S60X6 S100X8 45 Spout (S60X6)
Visit shop4 offers from £9.67 - £30.79
View price history by clicking the chart icon.
This guide is for anyone needing to customize their IBC tank liquid handling setup. The B2C IBC Tank Fitting Adapter offers a versatile solution for connecting various accessories, ensuring a secure and leak-resistant fit. A key caveat is the need to confirm your IBC tank's thread size (S60x6 or S100x6) before purchase.
| Model Part Number | B2Cconnectoris10 |
|---|---|
| Brand | B2C |
The S60x6 thread is the most common and typically measures approximately 60mm across the major diameter of the thread, with a pitch of 6mm. The S100x6 thread is larger, measuring approximately 100mm across the major diameter. You may need to measure your tank's outlet or consult its manual.
While the fittings are designed for secure liquid handling, the suitability for specific food-grade applications depends on the materials used and local regulations. It's recommended to verify material specifications if used for potable water or food products.
Male adapters have external threads that screw into an internal (female) thread. Female adapters have internal threads designed to accept an external (male) thread. Choose based on the thread type of your IBC tank outlet and the accessory you wish to connect.
Typically, hand-tightening is sufficient. However, for a more secure fit or to overcome initial resistance, a strap wrench or large adjustable pliers may be used carefully. Avoid overtightening, which can damage the threads or the fitting.
Yes, by using an appropriate adapter. Many B2C fittings include options for barbed connectors or threaded outlets that can be adapted to accept standard garden hose fittings.
The selection typically includes single-lever quick valves that allow for easy on/off control of the liquid flow from the IBC tank outlet.
Double-check that you have the correct thread size (S60x6 or S100x6) for your IBC tank. Ensure the tank's outlet threads are clean and free from damage or debris.
Ensure the fitting is securely tightened. Inspect the seal or gasket for damage and replace if necessary. For some applications, PTFE tape or a suitable sealant may be required on the male threads of the connection.
Ensure the valve is fully opened. Check the valve mechanism for any obstructions. If it's a quick-release connector, ensure it is properly seated and locked.
Setup: Ensure your IBC tank has either an S60x6 or S100x6 outer thread. Select the appropriate B2C fitting that matches your tank's thread and the desired connection type (e.g., female adapter for a male thread, or vice-versa). Screw the fitting onto the IBC tank outlet until snug. For connections involving hoses or spigots, ensure a secure fit. Hand-tighten first, then use appropriate tools if necessary, being careful not to overtighten.
Compatibility: These fittings are specifically designed for IBC tanks with S60x6 and S100x6 thread sizes. Always verify your tank's thread specification before ordering.
Care: Clean fittings periodically with water and a mild detergent. Ensure no debris obstructs the threads or sealing surfaces. Inspect O-rings or gaskets (if applicable) for wear and tear, replacing as needed to maintain a leak-free seal.
