U-Pol Plast X Plastic Bumper Trim Paint - Grey
Best current price£65.32from eBay
Best offers
Shopping.co.uk recommended and popular offers
eBay£65.32Visit shop Upol PLAS/5MG Plast X MEDIUM GREY PAINT Plastic Bumper Trim Aerosol U-Pol X 4
Visit shopeBay£65.32Visit shop All Offers
2 offers from £65.32 - £71.82
View price history by clicking the chart icon.
eBayUpol PLAS/5MG Plast X MEDIUM GREY PAINT Plastic Bumper Trim Aerosol U-Pol X 4
Free delivery in 1–3 days
£65.32
Visit shop
OnBuy.comUpol Plas/5Mg Plast X Medium Paint Plastic Bumper Trim Aerosol U-Pol X 4 Grey 5060859874530
Free delivery in 1–3 days
£71.82
Visit shop
Product Information
Full details
U-Pol Plast X is designed for automotive DIYers and professionals looking to restore or customize plastic components like bumpers and trim. This aerosol paint offers excellent coverage and a durable satin grey finish, though it is essential to ensure the plastic is properly primed before application to ensure long-term adhesion.
All features
| Colour | Grey |
|---|---|
| Model Part Number | PLASTX |
| Brand | U-Pol |
Extended Product Information
FAQs
Do I need a primer for U-Pol Plast X?
Yes, it is highly recommended to use a suitable plastic primer or adhesion promoter to ensure the paint bonds correctly to the surface.
Can this be used on interior plastics?
While formulated for exterior bumpers and trim, it can be used on interior plastics, but ensure the area is well-ventilated during application.
How many coats should I apply?
Apply 2-3 thin, even coats rather than one heavy coat, allowing for drying time between each application.
Is this paint resistant to car washes?
Once fully cured, the paint provides a durable finish that is resistant to normal environmental elements and car washes.
Can I sand the paint once dry?
You can lightly sand the finish if there are imperfections, but you will need to apply an additional thin top coat to restore the satin appearance.
Troubleshooting
Paint is bubbling or peeling shortly after application
This usually indicates the surface was not properly primed or cleaned of silicone/wax. Sand back, degrease, and re-prime before repainting.
Spray nozzle is clogging
Always clear the nozzle by holding the can upside down and spraying until clear gas comes out after every use.
Finish looks uneven or textured
Ensure you are keeping a consistent distance from the surface and overlapping strokes by 50% for uniform coverage.
Pros and Cons
Pros
- Durable satin finish
- Specifically designed for plastic adhesion
- Easy to use aerosol format
- Fast drying time
Cons
- Requires proper primer for best results
- Limited to specific colour variants
- Not intended for non-plastic surfaces
Setup, Compatibility & Care
Before use, ensure the plastic surface is completely free of grease, wax, and silicone by using a dedicated surface degreaser. The surface must be suitably primed with a plastic adhesion promoter or primer to guarantee the paint does not flake. Shake the aerosol can vigorously for at least two minutes before spraying. After finishing, invert the can and spray for a few seconds to clear the nozzle, preventing clogs for future use. Store in a cool, dry place away from direct sunlight.