Charnwood Carbide Tipped Full Curve Hollowing Tool - M2035T
Best current price£49.00from B&Q
Best offers
Shopping.co.uk recommended and popular offers
B&Q£49.00Visit shop B&Q - M2035T Carbide Tipped Full Curve Hollowing Tool
Visit shopB&Q£49.00Visit shop All Offers
2 offers from £49.00
View price history by clicking the chart icon.
B&QB&Q - M2035T Carbide Tipped Full Curve Hollowing Tool
Free delivery in 1–3 days
£49.00
Visit shop
Product Information
Full details
The Charnwood Full Curve Hollowing Tool (M2035T) is designed for woodturners of all skill levels who want a reliable, low-maintenance solution for hollowing and shaping wooden vessels. Its standout feature is the long-lasting carbide tip, which offers exceptional edge retention compared to traditional high-speed steel; however, users should note that the tool is primarily a scraper and may not replace specialized gouges for aggressive bulk removal tasks.
All features
| Model Part Number | M2035T |
|---|---|
| Brand | Charnwood |
Extended Product Information
FAQs
Can I sharpen the carbide tip once it is dull?
No, the carbide tip is designed to be rotated to a fresh edge. Once all edges of the tip are worn, the cutter should be replaced.
Is this tool suitable for beginners?
Yes, it is highly suitable for beginners because it does not require the learning curve of sharpening traditional woodturning gouges.
Does the tool work on all types of wood?
It is effective on both softwoods and hardwoods, though users should ensure they are not exceeding the recommended speed settings for their lathe.
How do I know when to rotate the cutter?
You will notice increased resistance when moving the tool across the wood or if the surface finish starts to look fuzzy rather than smooth.
What should I do if I lose the set screw?
The set screw is a standard size, but please contact your retailer or Charnwood support to ensure you obtain the correct thread pitch for the M2035T model.
Troubleshooting
The tool feels like it is 'tearing' rather than cutting
Ensure the cutter is rotated to a sharp position and maintain a steady, light scraping angle rather than pushing the tool aggressively into the wood.
The carbide tip vibrates or rattles
Check the mounting screw to ensure the carbide tip is properly seated and tightened against the tool shaft.
Pros and Cons
Pros
- Significantly longer edge life than traditional HSS tools
- Maintenance-free design eliminates the need for complex sharpening jigs
- Comfortable ash wood handle designed for reduced vibration
- Versatile performance on both softwoods and hardwoods
- Ready to use straight out of the storage tube
Cons
- Scraping action is less efficient for aggressive bulk wood removal
- Carbide cutters cannot be sharpened once all sides are dull
- Limited to specific hollowing geometries compared to custom-ground gouges
Setup, Compatibility & Care
Setup is minimal; the tool arrives factory-sharpened and ready for immediate use. Ensure your tool rest is set at the appropriate height—typically at center line or slightly below—to maintain optimal control over the scraping action.
Care Instructions:
- Storage: Always store the tool in its provided transparent tube to prevent the carbide edge from chipping against other tools.
- Maintenance: Check the set screw periodically to ensure the carbide cutter is tightened securely before starting your lathe.
- Cleaning: Keep the European Black Ash handle clean and free of excessive wood dust; you may occasionally apply a light coat of wax to the wood to maintain its finish.
- Cutter Replacement: When the current edge no longer cuts cleanly, use a hex key to loosen the screw, rotate the cutter to a fresh edge, and retighten firmly.