Best current price£7.00from eBay
Shopping.co.uk recommended and popular offers
eBay£7.00Visit shop Vilene 609 Stretch Interfacing Iron On For Jersey 75cm Wide White Per Metre
Visit shop2 offers from £7.00 - £7.99
View price history by clicking the chart icon.
This Vilene Vlieseline H609 is for sewists working with stretch knit fabrics like jersey. Its key benefit is providing stable yet flexible support that moves with your fabric, preventing distortion. A potential caveat is the need for proper testing to ensure adhesive satisfaction. This is a high-class, super stretch knit interfacing designed to be ironed onto elastic knit jersey fabrics, offering a very soft and elegant hand feel due to its special construction. It's extremely elastic in both warp and weft directions, suitable for large and small part fusing, with excellent adhesion that withstands multiple care cycles.
| Model Part Number | 2VH609-10 |
|---|---|
| Brand | Vilene Vlieseline |
It is ideal for light to medium weight elastic stretch knit fabrics, such as jersey, lycra, and other similar materials that require stretch and flexibility.
Always test on a fabric remnant first. Use a hand iron, press each area for 10 seconds, and allow the fused pieces to cool completely flat for about 30 minutes before handling.
This interfacing is specifically designed for stretch knit fabrics. It may not provide the desired results or might alter the hand feel significantly on woven fabrics.
The interfacing should always be cut in a lengthwise direction, following the grain of the fabric it will be applied to.
It offers a very soft and elegant hand feel, maintaining the natural drape and comfort of your stretch fabrics.
The excellent adhesive coating provides outstanding adhesion after many cycles of care treatment, meaning it holds up well through washing.
Not allowing the interfacing to cool flat for the recommended 30 minutes can result in the adhesive not setting correctly, potentially leading to peeling or poor adhesion over time.
Ensure your iron is hot enough (test on a fabric remnant first), press for the full 10 seconds, and ensure the adhesive side is facing the fabric. Make sure the fabric is clean and free of any finishes that might interfere with adhesion. Allow sufficient cooling time.
Reduce the iron temperature slightly and the pressing time. Ensure you are not moving the iron back and forth too much during pressing; use a firm, stationary press. Check that the fabric is lying flat before and during ironing.
This interfacing is designed to be soft. If it feels too stiff, ensure you are using the correct fabric type (light to medium weight stretch knits). Check iron temperature; excessive heat can sometimes alter the feel.
Confirm that the interfacing is cut in the lengthwise direction and aligned with the fabric grain. Ensure you are pressing, not ironing (sliding the iron), to avoid stretching the interfacing during application.
Setup:
Compatibility:
Care:
