Best current price£19.99from eBay
Shopping.co.uk recommended and popular offers
eBay£19.99Visit shop Rockshox Shock Bush Mounting Hardware 20mm x 8mm inc DU Bush 11.4118.091.806
Visit shop2 offers from £19.99 - £20.39
View price history by clicking the chart icon.
This guide is for mountain bike owners using RockShox rear shocks. It provides essential information on the RockShox Spare Rear Shock Mounting Hardware (8 x 20.0mm), ensuring proper fit and function for optimal suspension performance. A key benefit is maintaining the integrity of your suspension system. One caveat is that this hardware is not compatible with the RockShox BAR shock without contacting SRAM directly for specific parts, and careful verification of compatibility with your frame is crucial.
| Brand | RockShox |
|---|
You need one kit per eyelet. Since a rear shock has two eyelets, you will need two kits for one rear shock.
This hardware is designed specifically for RockShox rear shocks. While it fits standard 1/2" x 1/2" eyelets, compatibility with other brands is not guaranteed and should be verified with the shock manufacturer.
The bolt mount diameter for this specific hardware kit is 8mm.
This hardware is designed for a frame mount width of 20mm.
No, this hardware is not compatible with the RockShox BAR shock. You will need to contact SRAM directly for specific 12mm BAR hardware.
If your shock eyelets are damaged, they may need to be replaced or repaired by a qualified bike mechanic. Using damaged eyelets with new hardware can lead to further issues.
Torque specifications are typically found in the service manual for your specific RockShox shock model or your bicycle frame manufacturer's documentation. Always refer to those sources for accurate torque values.
Verify the eyelet size is 1/2" x 1/2". Ensure you are not attempting to use hardware with the incompatible RockShox BAR shock. Check if the bolt diameter matches your frame's requirement.
Ensure you have used the correct quantity of hardware (two kits per shock). Check that all bolts are tightened to the manufacturer's specified torque. Inspect eyelets and hardware for wear or damage.
Ensure the frame mount width (20mm) is compatible. Clean any debris from the frame mount and shock eyelets. Lightly grease the bolt threads.
This may indicate cross-threading or overtightening. Ensure the bolt is started straight. Use appropriate torque wrench settings. If seized, professional assistance may be needed.
Setup:
Compatibility:
Care:
