HJC HJ-45A F100 Clear Pinlock Insert - White

This HJC HJ-45A F100 Clear Pinlock Insert is specifically designed for the HJC F100 helmet in sizes XS, S, and M, fitting the HJ-45A visor.

Clean the insert with a soft, damp cloth or a mild visor cleaner. Avoid harsh chemicals and abrasive materials to preserve the anti-fog coating.

No, this Pinlock insert is exclusively compatible with the HJC HJ-45A visor, which is found on specific HJC F100 helmet sizes (XS, S, M).

Installation is generally straightforward. It involves aligning the insert with the visor's Pinlock pins and pressing it gently into place. Detailed steps are provided in the 'Setup' section.

The main benefit is the prevention of visor fogging by creating a sealed air pocket, which significantly improves visibility in damp or cold conditions, enhancing rider safety.

Yes, Pinlock inserts are highly effective in cold weather, as the trapped air acts as an insulator and the system prevents condensation from forming on the inside of the visor.

Ensure the visor is clean and free of debris. Check that the Pinlock pins on the visor are correctly positioned and that the insert is firmly pressed into place, creating a seal all around.

Verify that the Pinlock insert is the correct model for your visor. Ensure the silicone edge is intact and making full contact with the visor. Clean both the insert and the visor as per care instructions.

Make sure you are aligning the insert with the Pinlock pins on the visor. Apply gentle, even pressure. If resistance is met, do not force it; re-check alignment.