E-Tech Clear Vision Soft PVC Restorer - ER00141

This restorer is specifically designed for soft PVC (polyvinyl chloride) materials like those found on convertible car windows, boat covers, tents, caravans, and motor homes.

Yes, it is non-flammable, non-toxic, and classified as non-hazardous to human health and the environment. It is free of ammonia, harmful solvents, and silicones.

Apply a small amount to a soft, clean cloth and rub it gently onto the PVC surface in a circular motion. Allow it to haze over slightly, then buff off with a separate clean, dry cloth.

For light cloudiness, one application might suffice. For more severe yellowing or hazing, multiple applications, potentially over several days, may be required for optimal results.

Yes, it contains fine, premium-grade abrasives suspended in a water-based emulsion. These are designed to polish the plastic gently without causing damage.

The product has a long shelf life when stored correctly in a cool, dry place with the cap tightly sealed. Specific expiration dates are not typically indicated, but consistency is ensured through ISO9001:2008 manufacturing standards.

This product is formulated specifically for soft PVC. It may not be suitable or effective on hard plastics.

Ensure the surface was thoroughly cleaned before application. Apply more product and continue rubbing with a clean cloth. Multiple applications may be needed for heavily degraded surfaces. Allow adequate drying time between applications.

A small amount of water can be added to the cloth or surface to aid spreading. Ensure an even, thin layer is applied.

Severe yellowing caused by UV damage or aging may not be fully reversible. Try a second or third application. If the plastic is brittle or deeply discolored, the damage may be permanent.