Regency Pre-finished Oak Internal Door - 33 inch

While the solid core offers good durability, this door is primarily designed for standard interior use and may not withstand high humidity or moisture levels common in bathrooms over the long term without potential damage to the finish.

The door can typically be trimmed slightly on the top, bottom, and sides. However, care must be taken not to cut into the main panel areas or compromise the structural integrity. It's advisable to consult a professional for precise trimming.

The door comes with a 10-year guarantee, providing peace of mind regarding its durability and construction.

No, this door is supplied without any hardware. You will need to purchase handles, hinges, and any locking mechanisms separately.

The door depth is 35mm, which is standard for most internal doors.

While possible, it's generally not recommended as it can obscure the natural oak grain and the intended finish. If you choose to paint or varnish, ensure the surface is properly prepared according to the paint/varnish manufacturer's instructions.

The available size is 1981mm x 762mm (78" x 30").

Re-measure the door frame and compare with the door's dimensions (1981mm x 762mm). If the frame is slightly off, minor adjustments may be possible by trimming the door edges (consult a professional if unsure). If significantly different, a different sized door may be required.

For minor scratches, touch-up pens or wood repair kits in a similar oak shade can be used. For deeper damage, consult a professional restorer or consider a complete refinishing. Always handle with care during installation.

Ensure you are using appropriate screws for the door's solid core. If the screw holes are stripped, you may need to use larger screws or wood filler to create a secure anchor point.

Check for any warping or swelling. Ensure hinges are properly aligned and installed. Minor adjustments to hinge placement or filing down the sticking area might resolve the issue.