Stoner Decon Prep Iron Remover & Wheel Cleaner - 643 mL

Yes, the pH-balanced formula is safe for use on ceramic coatings, helping to maintain their protective properties by removing harmful contaminants.

Allow the product to dwell for 1-3 minutes, or until the color change is complete. Do not allow it to dry on the surface.

It is best to use this product on cool surfaces and out of direct sunlight to prevent it from drying too quickly, which could lead to spotting or residue.

Regular wheel cleaners primarily focus on surface dirt and grime. Iron removers like Decon Prep specifically target and chemically dissolve iron particles (like brake dust) that can embed themselves into surfaces.

Apply enough product to wet the surface evenly. For heavily contaminated areas, a more generous application may be necessary.

Yes, the transition from blue to orange is a visual indicator that the product is reacting with and dissolving iron contaminants.

There may not be significant iron contamination present, or the surface might be too dry. Reapply to a slightly damp surface or ensure even coverage.

Ensure the product is thoroughly rinsed off with a strong stream of water. Agitation with a wash mitt or brush may be needed on heavily soiled areas before rinsing.

Remove the nozzle and soak it in warm water. Gently clear any blockage with a fine pin or needle. Rinse thoroughly before reattaching.

While designed to be odorless, residual odors can sometimes occur from other products or environmental factors. Ensure good ventilation during use.