Festo Air Solenoid Valve - VSVA-B-B52-H-A1-1R5L

A 5/2 bistable valve has five ports and two stable states. It requires a signal to change state and remains in that state until a new signal is applied, without continuous power consumption.

It means the valve's mounting interface and dimensions conform to the ISO 15407-1 standard, ensuring compatibility with standardized sub-bases and manifolds.

This specific variant is designed for a particular electrical actuation. Always check the product specifications for the compatible voltage range and ensure your control system provides the correct signal.

You need a sub-base specifically designed for ISO 15407-1 standard with 26mm ports to ensure a proper fit and seal with the VSVA-B-B52-H-A1-1R5L valve.

A metal housing provides increased durability, resistance to impact, and better protection against harsh industrial environments compared to plastic housings.

Yes, this valve is designed to support mixed-size manifold assembly, allowing for flexible integration with other compatible Festo valves.

Verify the electrical connection, ensure the correct voltage is supplied, and check that the control signal is active. Confirm the valve is not internally damaged or obstructed.

Check for air leaks in the pneumatic lines or cylinder. Ensure the air supply pressure is within the specified range. Verify the nominal flow rate is adequate for the actuator size and speed requirement.

Confirm the correct bistable signal sequence is being applied. Check for mechanical obstruction or damage to the internal spool. Ensure the valve is not being held in position by external forces.

Inspect the seals and internal components for wear or damage. Ensure the valve is correctly mounted to the sub-base and that the sub-base seals are intact.