HOUHUI Motion Sensor LED Strip Lights - 5M - Warm White
Best current price£33.58from eBay
Best offers
Shopping.co.uk recommended and popular offers
eBay£33.58Visit shop HOUHUI Dual Motion Sensor Light 5 Metre lights, Warm White
Visit shopeBay£33.58Visit shop One Offer
1 offer from £33.58
View price history by clicking the chart icon.
eBayHOUHUI Dual Motion Sensor Light 5 Metre lights, Warm White
Free delivery in 1–3 days
£33.58
Visit shop
Product Information
Full details
The HOUHUI 5-meter Motion Sensor LED Strip Light is designed for homeowners seeking automated, hands-free lighting in high-traffic areas such as hallways, staircases, and bedside floors. This system provides a convenient, energy-efficient glow using high-brightness 2835 LEDs that trigger automatically upon detecting movement and power down after 60 seconds of inactivity; however, users should note that this strip is strictly rated for indoor use and is not water-resistant.
All features
| Model Part Number | HOUHUI-1 |
|---|---|
| Brand | B&Q |
Extended Product Information
FAQs
Can I connect multiple HOUHUI strips together?
The kit is designed for the included 5-meter length. Attempting to bridge multiple kits may overload the power adapter.
Is this strip waterproof?
No, this product is strictly for indoor use and should not be used in bathrooms or areas with high humidity.
Can I adjust the sensitivity of the motion sensor?
The sensitivity is factory-calibrated for standard indoor distances and cannot be manually adjusted.
What is the total length of the power cable?
The kit includes a 12V power adapter and 3-pin connectors designed to reach standard household outlets.
Can the strip be cut anywhere?
No, you must only cut the strip at the indicated cutting marks (usually marked by a small scissor icon or copper pads) to avoid damaging the circuit.
Troubleshooting
Lights do not turn on when motion is detected
Check that the 12V power adapter is securely plugged into the wall and that the 3-pin connectors are properly seated at all junctions.
The light strip keeps falling off the surface
Ensure the surface was cleaned with rubbing alcohol before application. If the surface is highly textured or dusty, you may need to supplement the adhesive with mounting clips or double-sided mounting tape.
The sensor is not responding to movement
Ensure the sensor window is not covered by dust or obstructions and that it is positioned to 'see' the typical path of movement in the room.
Pros and Cons
Pros
- Automatic motion-activated operation for hands-free convenience
- Energy-efficient auto-shutoff helps reduce electricity usage
- Easy installation with peel-and-stick adhesive
- Cool-to-the-touch LED technology ensures safe operation
- Flexible design can be trimmed to specific lengths
Cons
- Not suitable for outdoor or damp environments
- Fixed 60-second timer cannot be adjusted to other durations
- Adhesive may not adhere well to dusty or textured surfaces
- Limited to a single color temperature (warm white)
Setup, Compatibility & Care
To install, ensure your chosen surface is clean, dry, and free of dust or oils to allow the adhesive to bond properly. Before peeling the backing, measure your space and verify where you need to make cuts. Use sharp scissors on the designated copper cut points marked on the strip.
Connect the strip to the provided 12V power adapter using the included 3-pin cables. Once installed, avoid bending the strip at extreme 90-degree angles to prevent internal circuit damage. Maintenance is minimal: periodically wipe the sensor lenses with a dry, lint-free cloth to ensure the motion detection remains accurate. If you need to remove the strip later, use a hair dryer on a low heat setting to soften the adhesive before pulling to protect your wall paint or surface finish.