Best current price£25.49from B&Q
Shopping.co.uk recommended and popular offers
B&Q£25.49Visit shop B&Q - BarnumClear Dimple Glass Globe Antique Brass Ceiling Light Fitting
Visit shop2 offers from £25.49
View price history by clicking the chart icon.
This guide is for homeowners looking to add a modern touch to their interior lighting. The First Choice Lighting Barnum ceiling light fitting offers a stylish antique brass and clear dimple glass design, ideal for enhancing various rooms. While it's versatile and compatible with dimmable and smart bulbs, users must ensure the chosen bulb's length fits within the fixture's dimensions.
| Model Part Number | 5056367156787 |
|---|---|
| Brand | First Choice Lighting |
It requires one E27 ES bulb with a maximum wattage of 60W. It is compatible with LED and most smart bulbs.
Yes, this fitting is suitable for use with LED bulbs.
To achieve dimming, you must use a dimmable E27 ES bulb and, if applicable, a compatible dimmer switch.
This fixture is designed for general indoor use in rooms such as bedrooms, living rooms, kitchens, and hallways. It is not rated for bathroom use where specific IP ratings are typically required.
The fitting has a height of 21 cm and a diameter of 20 cm.
Switch off the power and allow it to cool. Wipe gently with a soft, dry or slightly damp cloth. Avoid abrasive cleaners.
With a height of 21 cm, it is a flush fitting and generally suitable for rooms with lower ceilings where a pendant light might be too long.
Check that the bulb is correctly screwed in and not burnt out. Verify the power supply is on and the fuse/circuit breaker has not tripped. Ensure the fitting is properly wired (consult a qualified electrician if unsure).
This can often be caused by a loose bulb or a faulty bulb. Try tightening the bulb or replacing it with a new one. If using a dimmable bulb, ensure it is compatible with the fitting and dimmer switch (if applicable).
Ensure you are using a bulb specifically rated as 'dimmable'. Check that the dimmer switch (if used) is functioning correctly and is compatible with the type of bulb installed.
Setup: This is a Class I rated fitting, meaning it is Earthed for your safety and should be installed by a qualified electrician. Ensure the power supply is switched off at the mains before installation.
Compatibility: Requires one E27 ES bulb with a maximum wattage of 60W. It is compatible with LED bulbs and most domestic smart light bulbs. Crucially, always check the bulb length against the product dimensions (21 cm height x 20 cm diameter) to confirm suitability and ensure it does not exceed the fitting's internal space.
Care: To clean, switch off the power and allow the fitting to cool. Gently wipe the glass and metal components with a soft, dry or slightly damp cloth. Avoid using abrasive cleaners or solvents, as these can damage the finish.
